Experience with Inakustik 3500P Power Conditioner??

I would also like to flip my coin and put my two cents into this subject.

My purchase of the Inakustik 3500p was very overwhelming compared to my history of these conditioners. 

PS Audio Quintescance.
Synergistic Research Powercell 10SE. 
Isotech
Audience Adept Response aR6TSSD.
Core Power Equi-Core 150/300’s.
Hidiamond HDX1 passive conditioner. 
Akiko Correli. 

All the conditioners did something in a positive/negative way but always had a sacrificial effect in the end. Kind of a two steps forward, three steps back. Or sometimes four steps back. 

Then the Inakustik 3500p rang my doorbell. Boy was I excited after reading/hearing about this piece. 

After initial install this thing just transformed my system to a level I’ve never heard(even with factory power cord) before. It was like basically putting all those conditioners in a mixer (X 100) and taking out all the negatives. Even watching regular satellite the amount of information I’m hearing now is so dramatic. I’m hearing things all around the room I never heard before. My 3 dogs start to bark at the stairs to my right behind me hearing noises from just movies on digital cable. It’s crazy. Kinda annoying but anyhow, you get the idea. It’s so interesting playing my 1000’s of music files over and over again and hearing them differently to say they are not that same song. Again, it’s just crazy.

Oh...and for movies...I will suggest that any movie buff will swear they were in an imax theatre - with well equipped components of course. One word comes to mind - STUNNING!!!

This Inakustik 3500p conditioner at roughly 150 hours has increased my systems performance by at least 20-25% out of the box to now. I’ve been told it progresses more up to 500 hours. Wow. And....I’m awaiting my Inakustik power cord re-terminated with a Furutech 20amp connector. Can’t wait to hear this......

This Inakustik 3500p will stay in my system.....everyone should do the same.........CHEERS!!!

Bacardi

Yes. Bob at Worldwidewholesales.com.
1-519-619-9924.

Cheers.

This an update in regards to the above thread on 03/06/19. 

Upon inserting the Inakustik power cord with the Furutech 20 amp female connector from the factory power cable difference was night and day. It was an immediate jump in volume which I new would happen. I’ve had power cords do this with my subwoofer which a had to dial the sub volume down 2-3 notches.          

Furthermore this conditioner at its break in period and the Inakustik cord and furutech connector broken in now has made me realize the potential of this conditioner. It notched a couple levels as they broke in at 300+ hours. Extremely dynamic and spacious, bass hit hard and well rounded. One day I swore I had a subwoofer in the system as I hadn’t listened for a day or two and was really overwhelmed by what I heard. I also noticed focus of instruments and singers were more defined. I really can’t wait when I do get a subwoofer in the system how it will sound with this 3500P. 

One one thing too is my 75”KS9000 QLED looks really really good after plugging it into this conditioner. Extremely vibrant, blacks are blacker and even local digital cable(The voice) swore it looked 4K. It was that good. I would say a 15-20% better picture overall. And it’s not even calibrated yet!!!!! Wow. 

As I’ve said before, I cannot see myself taking this conditioner out with what I’m seeing and hearing....no way!!!!!

cheers and Happy Easter all!!!!

The cord re-terminated was an Inakustik 2505 power cord. Inakustik no longer makes them. They now have the 2404air which is another level. This 2505 is a bigger gauge than the smallest Inakustik power cord which is mainly for source/pre low current. One thing to remember, my conclusions above was mainly the difference from a factory cord to a custom ended connector on a stunning Inakustik power cord. Bob at worldwidewholesales did the termination himself with a Furutech F11 female end. The cord was already broken in but the connector needed it’s time and to blend seeing as though it is connected to the wall outlet. The wall outlet has a Furutech GTX-D rhodium receptacle with carbon wall plate and Akiko Harmonizer on the outlet itself. So the start of the chain is a dedicated 20 amp line to panel. 

     That’s just saying that my train has a beefy engine running the whole train. And this 3500P conditioner is the power plant of the train for sure. Without it everything wouldn’t been in its place....

I keep it on all the time......

Has anyone tried a subwoofer (s) through the 3500P? If so what were the differences from a dedicated line or separate outlet?

It is also really nice to see so many members liking this Conditioner. It is truly a work of art....