2. analog
  3. 1174295112

Dynavector XV1s loading & phono

Hi.

For those of you that have owned the XV1s, just curious as to what phono stage you are using with yours (or have used) and what loading you are putting on it to make it sound great!

I have got a XV1s at the moment, but with the Cary PH301mkII tube phono stage, have never got it to sound great. I was using the XV1s on LP12/Valhalla/Ittok II/rignmat anniversary. The default loading for MC on the Cary is 680 ohms. I modified it to make it about 150 ohms which did make a substatial improvment, however, sound was still very dull, undynamic, muffled, very unexciting.

I have heard the TeKaitorua (next model down) on a Oracle/smeIv setup going thorough a very modest solidstage phono/integrated setup and that gave extraordinary results! Likewise with the Lyra Titan, used through a solid stage Lyra Connosieur phono stage was absolutely amazing. Some people have replaced their Titan's with the XV1s! I don't think I'm hearing anything close to what the XV1s is capable of at all.

I think it is something with my front end analogue setup as my CD playback sounds spectacular, WAY better than the XV1s/Cary combo in every way. Since I have blamed the Cary for the poor match with the XV1s, I have since replaced the unit with the Kondo M7 phono - but as this is just a standard phono stage, I have had to revert back to my very modest MM Linn K18II cartridge. The Linn/Kondo setup is better than the XV1s/Cary in every respect - probably equal to that of CD playback in my system. To use the XV1s with the M7, will require step up transformers.

Question is:
1) What sort of loading are you guys out there using with the XV1s and on what phono? Tube or solidstate?
2) Is my deck/arm/PS combo the main cause of the poor sound from the vinyl?
3) What stepup transformers would one recommmend to match with the M7 - there is obviously the Kondo SFz ... any other worthy contenders?

Thanks a lot for all you guys help.

Regards
David
linnmaster

Showing 1 response by cipherjuris

cipherjuris
145 posts
 
David,

Like Fmpnd, I use an Aesthetix Io Signature phono stage, but my table/arm is an SME 20/2 with Graham Phantom arm. I'm running Io gain wide open with 100 ohm loading on the XV-1s. The sound is wonderful, and I have never had any problems with the XV-1s. The first 20 hours, it was nothing special, but it began to open up after 20 hours and kep getting better and better until about 100 to 110 hours. It has about 150 hours on it now and the changes since 100 hours are not very significant.

Good luck sorting out the problem.

Ed
More to discover