I just made the helix image air speaker cables with 2 14ga in Teflon tube and 12 gauge in Teflon tube. I just hooked them up and Holy sound stage! Instruments are more separated and everything got bigger. I think I need to move my speakers to get the bass back in the new sound stage. Thanks Steve. Going to make a coax next with silver and then power cables.
Duelund conversion to DIY Helix Geometry Cabling
I have been an avid user of the Duelund cabling for over two years now and have used them exclusively in my system with great results. I have built many for friends and have used a full loom of interconnects, speaker cables, power cords and an extensive wiring modification for a previously owned balanced power conditioner utilizing Duelund 600V PolyCast wiring which was transformative. My cabling desires can be a little addictive as I have owned and evaluated 40+ brands of cabling costing more than an entire stereo system!
Over the past six months I stumbled upon a thread here on Audiogon in regards to a Helix designed cabling and as you probably already know, I just had to look a little deeper into this cable design…After a month of studying and sourcing parts, I decided to reach out to the designer/architect, Williewonka who gave more insights and philosophy on how the cable came into existence.
That conversation got the ball rolling in converting one of my KLE Duelund interconnects to Steve’s Helix designed which only entailed replacing the neutral with a Mil-Spec 16 AWG silver-plated copper wire with the neural wire being 3 times longer than the signal wire and of course the “Coiling” of the neutral wire : )
After the modification was complete, I was not sure what to expect from the Helix cabling but I was quite shocked with the results with “ZERO” burn-in time…The sound stage became much wider/deeper with a much tighter/focused image and clarity/transparency is like nothing I have ever heard in any cabling regardless of cost. In fact, I just sold a full loom of a commercially designed Helix Cable that’s renowned around the world and has more direct sale than any cable manufacturer; these $200 DIY Helix Cables walked all over them…
I believe you will hear the same results as I have and have heard back from friends who have already modified their Duelunds with the same results; WOW! Remember the cables will need 200+ hours to burn-in and settle into your system. My system is now 90% DIY Helix to include IC, SC, PC and Coax with each cabling adding its beauty of an organic and natural presentation that draws you into the fabric of the music.
You can tailor the sound of your cables using Duelund, Mundorf silver/1% gold, the outstanding Vh Audio OCC Solid Copper or Silver with Airlok Insulation or your favorite wiring and you can change it at any time…
http://www.image99.net/blog/files/category-diy-cables.html
https://forum.audiogon.com/discussions/difference-in-sound-between-copper-and-silver-digital-cables
https://forum.audiogon.com/discussions/adding-shielding-to-existing-cables
Enjoy,
Wig
- ...
- 934 posts total
@donnylovely - Glad you are enjoying the Helix Speaker Cables RE:...
I know what you mean - I had a similar experience. HOWEVER - before you go around moving your speakers too much, I would recommend playing a wide variety of music to see if the bass has infact diminihsed
Also, give the cables about 200 hours break in before making any other changes. Nice to hear you plan on making the other Helix Cables - I posted very early on in this thread, the more helix cables you introduce into your system the better it sounds 😀 You might just find that the bass returns when you install the "Coax’ cable 😎 Once you have the cables sorted, then try moving the speakers Regards - Steve
|
- 934 posts total