2. speakers
  3. 153172-1252

DIY speaker isolation base for a wood floor

A definite sonic improvement in tightening up the bass. 
1. Start with 4 aluminum cones. I used some old Mod Squad Tip Toes.
2. 16x16 slab of granite.
3. 1/8 cork.
4. 1/2 inch neoprene rubber.
5. 1/8 cork.
6. Top with another 16x16 slab of granite.
7. Enclosed with a wood cradle to hide the mechanism.
  The granite is from scraps from a shop and was cheap. The added 1/4 inch of neoprene to 1/2 inch thickness did help. Let me hear your thoughts.
128x128blueranger

Showing 2 responses by georgehifi

georgehifi's avatar
georgehifi
10,312 posts
 

Geoff stop being such a putz, all you want to do is sell the OP your automotive valve springs for $13 each!! that anyone can get used from a auto wrecker for practically free!!!!!!
http://www.machinadynamica.com/Super_Stiff_Springs.JPG
http://www.machinadynamica.com/machina5.htm

blueranger This is the only thing worth buying to Isolate (de-couple) from a wooden floor.
https://www.ebay.com/itm/4-LARGE-SORBOTHANE-DISC-CIRCLE-FEET-PAD-2-5x0-5in-64x12mm-SILENT-PC-AMP-FIRM-70D/372429364953?epid=1031478471&hash=item56b6851ed9:g:O04AAOxycmBS70F6

georgehifi's avatar
georgehifi
10,312 posts
 
1. Start with 4 aluminum cones. I used some old Mod Squad Tip Toes.
2. 16x16 slab of granite.
3. 1/8 cork.
4. 1/2 inch neoprene rubber.
5. 1/8 cork.
6. Top with another 16x16 slab of granite.
7. Enclosed with a wood cradle to hide the mechanism.
The granite is from scraps from a shop and was cheap. The added 1/4 inch of neoprene to 1/2 inch thickness did help. Let me hear your thoughts.

No need for all that, or any expensive hifi products, just use 4 of these these under each speaker, Sorbothan pads it’s the best vibration isolater , they are 70 duro the heaviest duty and will support and isolate your speaker.
https://www.ebay.com/itm/4-LARGE-SORBOTHANE-DISC-CIRCLE-FEET-PAD-2-5x0-5in-64x12mm-SILENT-PC-AMP-FIRM-70D/372429364953?epid=1031478471&hash=item56b6851ed9:g:O04AAOxycmBS70F6

Cheers George
More to discover