diy power cord: Shinyata black mamba

Buy 100' 30awg, silver or silver plated wire, ceramic plug's. Cut 90 wires of desired lenght. 30 wires place paralel (no twisting) inside heatshrink. Do the same with L and N(30 for L and 30 for N separate of course). Place all three heatshrinked wires inside larger heatshrink, conect to the plugs, and you are going to have as good as cord as any on the market!

in addition: it is going to be 30awg TEFLON isulated wire. www.homegrown.com is reasonable priced suplier.

Thanks L: Now, how does one terminate the 30 different 30 ga into a single IEC and outlet plug connectors? Even if one solders them together in my trials I've found I cannot fit them under the screws for the final connection. Help!!

You would need to use a wire crimper, and a good one. The web site noted above is probably "homegrownaudio.com". Based on the sites price for the wire the PC would cost approx. $900.00 to make if it were 5" in length and would have very little resale value whether it cut the mustard or not.

That would be a pretty expensive DIY project.