2. digital
  3. 1389945239

DIGITAL HIGH-RES AUDIO SYSTEM -HELP PLEASE

I need your expert advice on building a 24 bit/96Khz, 24/192Khz max, computer based home audio system I'd like to integrate into my home audio/ht system. I'm not totally clueless on what I need but I could definitely use some advice and direction as well as helpful tips. I have a fairly good audio system I currently use for ht and music playback. So, I'm not starting from scratch but want to incorporate computer audio and WAV and FLAC file streaming and storage into my system. Video streaming and storage can wait for a future time.

My current system consists of the following:
Plasma HDTV
Full 5.1 surround setup (5 spkrs and 1 subwoofer with in-ceiling surrounds).
Three separate stereo amps that power the main l/r, subwoofer/ center and l/r surrounds.
Directv satellite source (box has HDMI and digital audio output)
Older DVD/CD player as source used for movies and music.
Surround sound processor (older unit with just coax and optical audio inputs/outputs, no HDMI or USB inputs/outputs).
Separate tube preamp with HT Passthru. I'd run computer analog outputs to this for 2-channel listening.

For computer audio I already have some components:

Newer Laptop with 4 USB2.0 ports, dual core processor, 2 GB RAM and 110 GB internal hard-drive that can be solely devoted to a computer audio system(only 35 GB free on HD, however).
Wireless high-speed LAN with smart HDTV already attached and streaming Netflix, Hulu, Pandora and Amazon Prime to the tv and laptop.
JRiver v19.0 media player installed but no downloads yet and only a handful of cds ripped.
Cambridge Audio DacMagic 24 bit/192khz DAC.

My current budget is only about $1,500 and was thinking my next steps should be to:
A. Buy a new or used Oppo BDP-103 or, preferably a BDP-105 to replace my DacMagic and Sony DVD,CD player and get at least into 21st century technology.
B. Buy a NAS next to connect via USB to my laptop when more funds become available.

So, please let me know the following:

1. Am I thinking correctly and on the right path with buying an Oppo followed by a NAS?
2. Is there a method to connect my laptop, and future NAS wirelessly to the Oppo? I'm currently running a 12ft USB cable from my laptop to my DAC. I know cabled is better than wireless but curious how much better.
3. Any suggestions for a good, affordable NAS?
4. Does the Oppo BDP-105 have internal surround sound decoding capability that would allow me to run analog cables to my 3 HT amps directly from its analog outputs and substitute for my Parasound processor?

Thanks in advance for any advice and guidance.
Tim



128x128noble100

Showing 4 responses by audioengr

audioengr
3,282 posts
 
Two things that will improve your system:

1) galvanically isolate your cable box - if you are using cable TV, this has a different grounding system, so you are creating BAD ground loops by connecting it to your TV/audio system. Get a Jensen isolation transformer and put it between the cable an your cable box. Its a 2-3" thing and costs about $40

2) reduce the jitter of the feed from your computer to your DAC. If you are feeding S/PDIF, then use a reclocker like the Synchro-Mesh. If you are using USB, then get a good USB converter like the Off-Ramp 5. Feed the Cambridge DAC with S/PDIF coax and a good cable like my BNC-BNC with RCA adapters. Lowering this jitter is more important than the DAC.

BTW, I agree about ripping with dbpoweramp (with accurate-rip enabled).

Steve N.
Empirical Audio
audioengr
3,282 posts
 
Timlub - I recommend the Off-Ramp 5 even with a DAC that has Async USB input. It is not a matter of it working. It is a mater of it sounding really good.

I even recommend using the Off-Ramp with my own Overdrive DAC for best results. I now offer a really good power supply for it, the Dynamo and this makes all the difference.

This all depends on how close you want to come to analog and elimination of harshness that is typical with digital. Its lowering the jitter that gets rid of the harshness without sacrificing detail and imaging.

You can certainly sacrifice detail and imaging with some tube DACs or even cabling etc. to eliminate harshness, but this is not my cup of tea.

Steve N.
Empirical Audio
audioengr
3,282 posts
 
You can use Win8 WMP wirelessly to stream audio to your OPPO. It is a DLNA device so this is built-in. The problem will be audio quality (jitter) because it uses a clock inside the Oppo for master clock. Also, not sure how user friendly DLNA will be with Win8. I have heard some complaints.

If it were me, I would use a USB converter like the Off-Ramp 5 that delivers a low-jitter hi-res signal over coax to the Oppo. You will have to connect the computer (any type) using up to 16 foot USB cable to the USB converter and then a really good coax cable about 1.5-2.5m long to the Oppo. The coax input on the Oppo is very good.

Steve N.
Empirical Audio
audioengr
3,282 posts
 
I misspoke - the DLNA to the Oppo is wired Ethernet, so you will need a router nearby.

I use my Oppo with wired Ethernet to view internet TV and movies.

Steve N.
Empirical Audio
More to discover