Digital Cable for 47 Labs Shigaraki Transport/Dac?


To the folks that have the 47 Labs Shigaraki Transport and Dac.What digital cable are you using and have tried?
holman

Showing 2 responses by dekay

Holman:

I do not use 47 Labs electronics (no longer use a DAC either), but when I used the 47 Labs cable (as a digital cable) between my player and a BC 1.1 DAC I found the Mapleshade digital IC to be close in sound to the 47 Labs cable.

I did slightly prefer the 47 Labs, but again the sound was very close.

If you plan on using 47 Labs cable throughout the system then purchase the kit for $600 (or look into their new line of cords which are more expensive). If not, then the Mapleshade cable is $125 and they offer a 30 day trial.

All of the cables in my setup (except power cords and tonearm wire) are 47 Labs OTA, and this may be why I preferred the OTA and the Mapleshade over other digital IC's (due to synergy).
Viggen:

I do not think that the Mapleshade Double Helix digital cable is the same as their Double Helix analog cable.

I'm not certain of the difference, but one thing I noticed is that it sounds "wrong" if it is not connected in the suggested direction, so for some reason (even though I only see two leads) it is a directional cable.

I also see from your system listing that you use the less expensive "Ultrathin" version which even Pierre describes as being lighter in the bass.

If you still have the Maplshade analog IC's around try loosening the adjustable RCA's (instead of tightening them) as this, on the digital IC anyway, increases extension in the HF area while @ the same time smoothing things out. I realize that this does sound a bit odd, but the same was true of my Harmonic Tech IC's which also used similar "big adjustable" RCA's. I found out by accident once when I forgot to tighten them (it took many weeks to figure this one out).

I just searched Bogdan and the cables are quite inexpensive. I sure could use a bit of their 18 gauge wire for the ground connections that I am replacing on some vintage gear (could probably leave it bare if it's stiff enough).

Are you using the Bogdan speaker cables as well? This is the first I have heard of them.