2. amps-preamps
  3. 166258-110858

Detecting “Dirty” Power

I bought a used BHK 250 still under warranty. It is plugged into a Denali S power conditioner.  I heard a hum coming from the area around the tubes.  I cannot hear it from my sitting position and it doesn’t effect SQ, but I want it gone.  

I sent it to PS Audio; they tell me there is no hum and sent it back. They implied I mostly likely have a power problem and recommended some troubleshooting steps.  I unplugged everything from the 250 and plugged it straight into the PS Audio receptacle.  The hum is still there, but it is not as pronounced.  A P15 power regenerator might fix the problem, but I want to know if I have a power problem before I do anything.

How can I determine the quality of the power coming into my house and out of the receptacle? FYI, the Denali is plugged into a PS Audio receptacle/dedicated 20 amp line.  I have a whole house generator w/ transfer switch and whole house surge protector. 
128x128oldschool1948

Showing 2 responses by lowrider57

lowrider57's avatar
lowrider57
5,396 posts
 
Before you send the amp back, test for DC on the line by using a Humdinger or the new iFi DC blocker. 
There is no hum thru the speakers, correct?

This hum may be in the design of the amp. If you can only hear it with your ear up close, don't worry about it. 

lowrider57's avatar
lowrider57
5,396 posts
 
If the Humdinger has no effect on the hum, then it's in the design of the amp. Some amps with toroidal transformers have a low-level hum. You said you hear the noise near the tubes, it's possible the transformer is located in that area inside the chassis. 
Anyway, good luck and keep us posted.


More to discover