My experience....
I currently own six DL 103 series carts ( 2 stock DL-103, 1 stock DL-103R, 1x Dl-103R SS retipped, 2x DL103 with wood body).
All I can say is that the arm needs at least 14-16 gms minimum effective mass in order to hear what the 103 series are really made of excluding the headshell weight. On the stock 103's currently installed in my system, I found the Orsonic AV101-S (16 gms) and Yamamoto (10.4 gms) to sound the best loaded at around 40 to 100 ohms in 26 dB SUT gain (1:20) with VTA a tad high (tail up a bit). As you can see, using the two headshells results in an effective mass in the range of 24-30 gms effective mass.
I tried unipivot arms in the 14 gms and less tonearm mass before and I was not pleased at the results even if I add weights on the headshell.
On the two wood body carts I have, I found that it sounds good even on the SME 3009 S2 Improved arm (9.5 Eff. Mass not including the original SME headshell which is about 6~7 gms)but really sound much better using a heavier headshell (Orsonic or Yamamoto).
So, in summary, try using an arm with a total effective mass of 23 gms. and above and I assure you from my experience, that you will hear a new sound on your DL103 compared to what you have now.
I currently own six DL 103 series carts ( 2 stock DL-103, 1 stock DL-103R, 1x Dl-103R SS retipped, 2x DL103 with wood body).
All I can say is that the arm needs at least 14-16 gms minimum effective mass in order to hear what the 103 series are really made of excluding the headshell weight. On the stock 103's currently installed in my system, I found the Orsonic AV101-S (16 gms) and Yamamoto (10.4 gms) to sound the best loaded at around 40 to 100 ohms in 26 dB SUT gain (1:20) with VTA a tad high (tail up a bit). As you can see, using the two headshells results in an effective mass in the range of 24-30 gms effective mass.
I tried unipivot arms in the 14 gms and less tonearm mass before and I was not pleased at the results even if I add weights on the headshell.
On the two wood body carts I have, I found that it sounds good even on the SME 3009 S2 Improved arm (9.5 Eff. Mass not including the original SME headshell which is about 6~7 gms)but really sound much better using a heavier headshell (Orsonic or Yamamoto).
So, in summary, try using an arm with a total effective mass of 23 gms. and above and I assure you from my experience, that you will hear a new sound on your DL103 compared to what you have now.