I am going to assume here you are referring to the standard, current DL103. The Origin Live tonearm's effective mass is marginal for a standard Denon DL103. It's a medium mass tonearm with 12g effective mass. The stock DL103 will perform more competently in a tonearm with effective mass in the range of 15 - 20g. Aftermarket modified DL103 products like the Zu 103 work in Rega-like tonearms of the same effective mass by re-bodying the stock 103 with a more massive and resonance-controlling case. In the Zu instance, their 103 weighs 14g. A stock DL103 weighs only 8.5g. On Rega-like tonearms, the heavier body generally requires an alternate heavy counterweight, too.
You have some choices: the easiest is to simply add mass at the headshell as part of the cartridge mount. You can buy shims of various weights. In your case, you will want to add 3 to 6g, which will put the combination of your cartridge and tonearm well in the system's resonance sweet spot. Right now you have marginal system resonance for favorable performance. You can model your variables on vinylengine, but you have to remember that since Denon measures dynamic compliance by a nonstandard baseline, yuo have to convert their figure of 5 to 9 for use with vinylengine's calculator.
Now it's possible that there is something else wrong, from the cartridge's cantilever suspenstion being worn to insufficient tracking force. In that tonearm you probably need to set VTF in the 2.5g - 2.8g range.
Properly set up, a DL103 cannot sound "shrill, sibilant, and fatiguing." It can be accused of other traits but not those. If it sounds like that, there's something wrong. You have a problem with resonance optimization, failing cartridge suspension, improper setup wrt VTA and geometry, or there is a turntable problem inciting the shrillness (bad main bearing, rattling tonearm bearings) that the cartridge is simply playing back. A DL110, is on the other hand a very good dynamic match for a Rega-spec tonearm, hence your good experience with that in the past.
Phil
You have some choices: the easiest is to simply add mass at the headshell as part of the cartridge mount. You can buy shims of various weights. In your case, you will want to add 3 to 6g, which will put the combination of your cartridge and tonearm well in the system's resonance sweet spot. Right now you have marginal system resonance for favorable performance. You can model your variables on vinylengine, but you have to remember that since Denon measures dynamic compliance by a nonstandard baseline, yuo have to convert their figure of 5 to 9 for use with vinylengine's calculator.
Now it's possible that there is something else wrong, from the cartridge's cantilever suspenstion being worn to insufficient tracking force. In that tonearm you probably need to set VTF in the 2.5g - 2.8g range.
Properly set up, a DL103 cannot sound "shrill, sibilant, and fatiguing." It can be accused of other traits but not those. If it sounds like that, there's something wrong. You have a problem with resonance optimization, failing cartridge suspension, improper setup wrt VTA and geometry, or there is a turntable problem inciting the shrillness (bad main bearing, rattling tonearm bearings) that the cartridge is simply playing back. A DL110, is on the other hand a very good dynamic match for a Rega-spec tonearm, hence your good experience with that in the past.
Phil