2. cables
  3. 1136687529

Dedicated power,long power cords - waste of time?

I am thinking about putting in a couple of dedicated lines but if I do this I will require extra long power cords, say about 20 feet in length, as the dedicated outlets must be installed across the room from where my system resides? There is no way around this.

Currently I have 3 pieces on 1 15 amp line. Bryston amp, Hovland preamp and my digital gear is plugged into a small BPT conditioner also on the same line. Installing 2 lines would allow me to drive the preamp and amp on their own lines and leave the digital alone on its own.

The downside is having to run 2 really long power cords which I would plug directly into the amp and preamp's IEC inlets.

Am I spinning my wheels here? Is this money down a rathole???

All opinions and/or related personal experiences are most welcome.
rgd

Showing 2 responses by rannagarden

rannagarden
44 posts
 
My dedicated line.

Don´t know if all of you may read it, but you could atleast scroll down and look at some pictures of how I did it. Just "next-page" it at bottom...

Shielded power-line. Dedicated fuse and line. High-quality wall-sockets.

If you ask me - worth the effort and money. Rewarded with calmer sound. Cleaner sound. Amp really enjoyed the bigger AWG ; )

Best,
Mike
rannagarden
44 posts
 
Jea48 - No worries Jim. My cellar hides plenty of not so nice things... But no asbestos ;) I will clean that place up a bit when the rest of the house is done.

The cable I used is the "ÖLMASS" 3x13 AWG and is approved in all ways for this type of installation. The braided "shield" of the cabel is connected to "earth" at fusebox. The fuse is a 16A gold-fuse for audio use.

Best,
Mike
More to discover