Correct way to us Shure VTF gauge?


Hey guys, I have one quick question for anyone using the Shure Gauge to set VTF. Should you make the arm bounce slighty after placing the stylus on the gauge. The reason I ask is because when I just gently place the arm on the gauge using the cueing lever it wll give me a reading of lets say 1.5g, then if I bounce the arm a little while it is resting on the gauge the reading will stop at aprox 2grams. Are you guys finding that you get a different reading when doing the two above mentioned methods, or are my RB300 bearings screwed? Is there something terribly wrong?

Thanks for your time,
Dave
ziggy23
Unfortunately I must concurr with Hi hifi. I got mine out and it reads just as above.
Aceto, which arm are you using? Your guys are telling me that once you lower the arm USING THE CUEING LEVER, take a reading.

Then, WHILE THE ARM IS STILL ON THE GAUGE, you dab your finger gently on the Gauge steel part end (to inflict a little Teeter-Totter action) you get the same reading as you did above?

Some folks on Vinylasylum are getting a slightly different reading (higher) after the teeter-totter stops and then the gauge settles.

Anyone Else?
You are a brave man to pose a question that could be interpreted as a less than favorable view of the SHure VTF on an analog forum.

Crusty old 30 year veterans of analog need nothing but their Shure VTF and the seat of their pants to do turntable setup.

Okay, my experience actually mirrors yours with the thing. 9 months ago I returned to vinyl when I bought a Nottingham Spacedeck with SpaceArm. Maybe I am inept with the tool, but I hate the darn thing. Can't wait to retire it.

I am reintroducing digital in my system. Its a Wally digital scale. (well actually a My Weigh digital scale with Wally mods) It arrived two days ago and will try it out Sunday. I'll keep the Shure handy just in case, but I aint gonna miss it.
Dr. Balance, I know what you're talking about, the gauge did the same thing to me. If you every so lightly place the cartridge down on the scale, sometimes it doesn't register. I take the reading after gently hitting the teeter totter...

Tedvan, I'm in the same boat, shoudl have a wally scale arriving shortly, and will hopefully confirm that the shure was OK, crossing my fingers...
Dr Balance, I now need to do another set of trials. I knew Dave was introducing a new worry, but I thought I had snuffed it. So we begin again, with grudgingly purile thanks.