Causes of CD player skipping?


Hello,
I own a Sony CDP-M555ES 400 CD megachanger that has began skipping pretty badly, especially on tracks 1, 2, and sometimes 3. The problem seems worse with CD-R's and CD-RW's. The tracks will begin playing, and then the player will skip to another place on the track, to the beginning of the track, or to another track.
I tried cleaning the laser lens and this did not work.
Any ideas on what could be causing this?
Thanks for your help.
daltonlanny

Showing 2 responses by casouza

BEWARE:
CD player gears and the plastic sliders that run atop the rails are made of nylon or Delrin.
DO NOT use regular household oil, 3 in 1, WD40 or any oil with solvents on plastic gears/sliders. WD40 has paraffin in its formula and will leave a sticky deposit.

Most of those lubricants start a chemical reaction with nylon and eventually the nylon part will crack or break. It may take a couple of years but it does happen. If in doubt read the Philips CD player service manuals.

There is a grease made specially for lubricating CD/DVD/VCR nylon parts. It is available through electronics parts stores/distributors.
White lithium grease from Home Depot is OK too, it does not attack plastic parts.
It is also available from Auto Parts stores and on ebay, search for white lithium grease. Avoid the ones mixed with molybdenium, they mess up the parts.
Use sparingly, apply a very thin film with a Q-tip.
Good luck