2. tech-talk
  3. 160522-2278

Cassis Grounding Solution

I meant "Chassis" in the heading above.  Sorry for the error.  System will not allow edit.

I use a pair of Tara Labs Zero Evolution balanced interconnect cables. These use a HFX Floating Ground Station to drain noise. A pair of drain wires is run from the cables to the HFX. Another drain wire is meant to connect to a component chassis.

https://www.taralabs.com/hfx

My components have no visible fasteners or ground lug to which I might use as the recommended termination point for the ground wire.

A friend suggested the following solution. I bought a StaticTek Banana Jack Outlet Adapter:

https://www.amazon.com/StaticTek-Adapter-Universal-Connection-Unbreakable/dp/B071J61CSV/ref=sr_1_3?c...

The Tara mini banana plug is 2mm. The StaticTek accepts only a 4 mm plug. I bought a 2mm banana jack female to 4mm banana jack male plug probe:

https://www.amazon.com/copper-Banana-Female-4mm-Probes/dp/B01JEEMQNQ/ref=sr_1_2?dchild=1&keyword...

This arrangement made for a tight secure fit into the gound of the AC outlet receptacle.

This may work with grounding needs other than mine is why I posted this.




kodak805

Showing 1 response by kodak805

kodak805 OP
73 posts
 
Thank you for your comments.  I do not disagree with how balanced cable grounds are commonly configured.

Tara Labs employs a different approach.  The cable shield is floating and requires the HFX unit and both cables drain wires connected together at the opposite end to complete the circuit. The drain wire lead from the HFX then dumps any residual noise left over from the Ceralex compound in the HFX into the external ground, in this case, the wall AC receptacle.

My system is extremely quiet without this arrangement. I am merely complying with the requirements of the Tara Labs' wide bandwidth design.
More to discover