2. amps-preamps
  3. 150405-94875

Carver, THE standard of excellence IMO

I have read many discussions on these forums and others about many people having difficulty getting hold of or information from the manufacturers or dealers about problems with their gear.  Some wait weeks,months or forever for a response.Yesterday (Sunday) I thought I was having a small problem with my Carver Crimson 350 amps and I did some tests described in the manual to check the KT120 tubes.  I was getting some strange meter readings and couldn't understand why.  So I went to the Carver site and wrote a detailed email at that site, expecting to hear back sometime this week.  At the time I did not know it went straight to the president and co-owner Frank Malilz, but it does. Frank marked it "very important" and forwarded to Bob Carver who at 9:15 pm (my time) sent me a detailed answer that solved my problems.  Are you kidding me!!!! straight to the pres and then to the designer (we all know who is a legend) and back to me within 6 hrs ON A SUNDAY!  To paraphrase a truck commercial....Carver doesn't raise the bar, it sets it.

I know not everyone can afford a set of $9500 monos but I am sure the service would be the same on Carver's new 275s at less than $2800.  I have heard the 275s at Axpona and they are voiced extremely close to the 350s just not as much power.  For most set ups they would be magnificent.  Who else gives the amp AND tubes a TRANSFERABLE 5 yr warranty?  Both the 350 and 275 play for hrs and never get hot.  Handmade in the USA and signed by the legend himself.  If you are looking for a tube amp in this category that plays far far above it's price you owe it to yourself to check out the 275 (or the 350s if you can go that way financially, 10 yr warranty on everything, if you talk to Bob he would probably give you a 50 yr warranty on amp AND tubes, I am not kidding in the least.)  I have no interest in any way with Bob Carver Corp other than a love of it's products and service.  I've posted some here before so you know I'm not a shill. I just wanted to educate some on this forum about my experience, about a great product and outstanding service from the people who make that product.  I believe they really care about audio and their customers.
DrMark  (Doc from MI on some Carver sites)
drkingfish
drkingfish OP
79 posts
 
artemus_5 ................" I always believed it was operator error in the setup"  You are absolutely correct , some novice, proby, guy hanging around , etc. had it totally incorrect.  I power my silvers w/ Bob's 350s w/ a 10 Octave LP1 w/ a C9 in the loop for serious listening.  There is no way I would add the C9 If it didn't contribute to the sound.  Take a good look at the 275s.
Geeqner .........:) :)  all is good!
Best
Doc from MI
richopp
760 posts
 
@drkingfish (LOVE the name--terrific writing and acting that is no longer appreciated by the "woke" amongst us...)

Uh, Phase Linear 700 caught fire the day I sold it from my shop.  New owner was having a big party and turned it up pretty loud for a long time.  POOF!

Every PL 400 and 700 back then blew up pretty easily...only one fire that I know of.  Nice amps, but a bit testy to use.  As for he new ones, I have no idea.

Cheers!
ncfamily4
1 posts
 
In 1990, I purchased The Carver CT-17 Dual pre-amp, and the incredible TFM-45 power Amp, and a year later the CB-15 power amp.  They have been in use, 25 out of the 29 years, since purchased new. These products have stood the test of time,  The CT-17 and the TFM-45 did have to go to the Carver repair facility last year,  due to capacitor failure, but that is to be expected,  They have been repaired and upgraded, and are flawless.  The best $2500.00 I ever spent. I listen to them on a daily basis for 2 channel stereo.  I will go up in flames, before these ever will.
jhills
615 posts
 
For many years Bob Carver and others have pushed the envelope to design and build innovative audio products. Bob Carver's new Crimson/Raven, tubed amps are not only innovative but have set a high standard of performance and affordability.

As I love the performance of My Rogue Cronus Mag.II, (100W per side) with my Maggie 1.7s, but know I'll need more power, when moving to the 3.7i. I have no doubt that Bob's 350 monos would be more than up to the task, but crossing my fingers that he might have a stereo, 200 or 250W per side, (built on the same concept as the Crimson/Raven 275 - 75W per side) in the works. I believe that even 200W per side, in such an amp, would be plenty of power for most moderate sized stats or ribbons ie. the 3.7s. and would be nice to only have to accommodate a single, rather than a pair of large mono ams.
If the folks at Carver are so inclined to come up with such a critter - I'll be the first in line.
At any rate - Kudos to Bob and Crew for providing, to the audio community, great products, fair prices and stellar service.....Jim 
rickytickytwo
88 posts
 
I am happy to see Carver fans in this forum. I hear too much B.S. from people regarding Bob Carvers equipment. I have owned a 6200 receiver,  m-.t power amps, a C- preamp (upgraded, nut not a Bill D),  3 m-4.ot power amps, a Sunfire true sub and a Sunfire signature sub. The only problem I have ever had was that after about 25 years, the B channel on the receiver cut out. 

More to discover