cart measurement vs quoted spec


Hi,
I'm a bit puzzled by some cart measurements performed with the ACOUSTECH test record, using HP oscilloscope and using (differential connection) through ML 326S phono-modules.

No loading (47k), measured on XLR pre-outputs. The following transpired:
Left vs. Right = *- 2dB* @ 1kHz 7cm/s lateral (mono track), *spec = <0,2dB!*
Left vs. Right = on 1kHz 7cm/s vertical out of phase track, clearly NOT EVEN CLOSE to out of phase!
1 kHz left channel only *- 16dB* leakage to right! *Spec = >28dB @ 1 kHz!*
1 kHz right channel only *-10dB* leakage to left! *Spec = >28dB @ 1 kHz!*

This seems a most disappointing showing indeed. Let me hasten to say that all variations with regards to anti-skate, VTA, VTF, Azimuth and Zenith, were attempted for any optimisation.

I shall not yet disclose the make, which is a VERY well known brand, and their TOP of the range offering.

Has any one got some explanation for how such a major variation can be the case?!

There might just be some folks out there trying there darntest by NEVER getting their apparent alignment problem fixed, please note the various threads, ---- and it might be a cart way out of quoted tolerance?

I have also noted that in this instance, MAJOR Azimuth (+/- 2 deg), VTA, VTF, changes had absolutely MINOR measured effects!
The 'biggest' in this case was 'Zenith' by some 0.5mm left turn to compensate for a 'minor' out of centre cantilever (~ 0.25mm off-set to the left).

Tonality and such is NOT really affected, BUT distortion with massed instruments/orchestra etc. i.e. as soon as things get 'busy' the problems start.

Greetings,
Axel
axelwahl

Showing 1 response by commcat

"...characteristic initials in gold, which decorate the sides of the cartridge housing, stand as a signal to the outside world that this technologically advanced cartridge is ******** the finest, most accurate and in our own opinion also best-sounding design."

The above is quoted from the manufacturers sales material which goes on to state;

"...with a newly developed, state-of-the-art, moving coil cartridge in the absolute high-end class. In terms of design technology, the ********** is of course based on many of the most important innovations and patents that ********* secured for ******** in the course of his work stretching back more than 30 years."

Apparently, the substantial cantilever offset is a technological achievement. Based on the manufacturers statements there should be no need to actually test the cartridge.