2. analog
  3. 130529-1790

Can stepup transformer be used with an MC phono stage?

I just purchased an Electron Images MCP-1 phono preamp and it seems to be a VERY good phono preamp;  however, I'm realizing it doesn't have enough gain for my .2 mV output Dynavector.  Doing a little more research, it seems that the MCP-1 works well for cartridges down to .5mV of output.  Could I use a stepup transformer between my cartridge and the MC phono input of the MCP-1 without causing any damage to the phono preamp or other equipment in my system?  If so, what specifications should I be looking for in a stepup transformer?

Thanks in response for any responses and advice.
wcheng2

Showing 1 response by tomwh

tomwh
150 posts
 
Lundal has a sut that can run 5 /10/20 to 1.  If the loading plug thing is correct and you measure zero you have the cat by the tail.  Now you can do the easy math and try all kinds of values around the so called optimum value.

If you do not diy you can get ahold of the information from the manufacturer.  If you have the gain of the amp plus the load someone can get you into the ballpark.  If you try it without a sut and it sounds less than dynamic I would get a sut.

Enjoy the ride
Tom

More to discover