Can POWER CORDS really make that big a difference?

Yes, but not always for the better. As others have suggested, i would "try before buying" i.e. pick some up from a dealer or company that allows returns if you don't like the results. Some cords seem to have very strong sonic signatures whereas others aren't nearly as evident. Sean
>

Viggen, it's like anything else. The more involved that you get in any project, the more you can find that is either blatantly "wrong" or could simply use a little improvement. As such, a system can perform very well with stock cords but that is not to say that it won't perform better with other cords. As i stated previously though, the opposite can also be true. Due to differences in design and compatability, you can also take a step backwards if you're not careful.

For those that think of the power cord as an extension of the AC wiring, it is no wonder that you doubt that it can make a noticeable difference. BUT, what if you thought of it as an extension of the power supply ? After all, that is exactly what it is.

Wouldn't it be possible to add various types of shielding, ferrites, capacitors, inductors or other means of impedance manipulation in order to design some type of "tuned trap" or "filter" ? In turn, couldn't you place this trap or filter PRIOR to the power supply inside the component, therefore minimizing the "trash" that makes it into the component in the first place ?

Well, that is EXACTLY what is taking place in SOME ( very few that i've seen ) aftermarket power cords. While the "components" of the power cord that achieve these results may not be in a separate box like those of a PLC ( Power Line Conditoner aka "power line filter" ), that does not mean that it won't work. The benefits to designs of this type that are well thought out are that they are not current limiting or creating as much of a phase shift. While it is true that their slope rate or "filter action" may not be anywhere near as severe or sharp as that of a larger tuned circuit in a seperate box, it might be all that you would need to get rid of the electrical and RFI hash that is riding the AC mains in your area.

If you doubt that the AC mains have noise on them, i HIGHLY urge you to beg, borrow or steal ( only joking about stealing ) an Audioprism AC Line Noise Sniffer. Plug it directly into the wall and listen to the roaring hash that comes out of the speaker. Then plug the Noise Sniffer into any "reasonable" PLC ( power line conditioner ) and listen to the difference. The noise should pretty much disappear or at least be massively subdued. You can also hear the benefits of parallel line filters like the Audioprism Quiet Lines or "homebrew" designs like those that Magnan suggests. These are simply plugged into other outlets in the building and left alone. Even though they are not in series with the gear ( unlike the "tuned" power cords that are in direct contact ), you can still, very evidently, hear the effect that they have on the noise level from the wall.

I have yet to meet ONE "skeptic" that could deny the benefits of AC line conditioning / filtering after experiencing a test like this first hand. Sean
>

Hearhere, none of my post was aimed at anyone in specific. There are tons and tons of people that either don't believe in or are on the fence about power cords. As such, my post was meant as a "generalization" to everyone out there but was speaking to them as an individual. As i've said before, "you" really need to try something out in "your" system to see if "you" like it or not. Know what i mean ?

As to being a "believer" in power cords, i was a "non believer" up until a year or two ago. I was of the same school of thought that you were, i.e. too small of a conductor, poor connections, etc... making the biggest difference.

I had to change my mind when i started experimenting for myself. In all honesty though, i did NOT like the results of the first cord that created a noticeable difference within my system. Swapping that one cord in and out of the system was like flipping a light switch. The effect was either there or it wasn't. As such, i became a believer but one could say i was still "leary" due to the initially negative outcome. I have since tried quite a few different power cords on different compnents with varying results.

Like they say, experience is the greatest teacher of all. That is why i encourage as many people as possible to find out for themselves what they do or don't like within the confines of their system. You don't have to start out expensive and you can even "DIY" ( Do It Yourself ) with great results. Sean
>