2. speakers
  3. 1266452415

Can I get deeper bass from my 890c Boleros?

Hi,
I have these Altecs hooked up to a marantz 2270.My main sources are an Onkyo DX 220 cd changer,a Sony PS FL1 drawer
style tt.Also sometimes use my Panasonic F86 dvd changer thru the 2270 too.
So,I really like my Boleros.Recently had them re-capped and had moretite applied in place of the turned to dust foam seals.The controls were de-oxed as well.
They sound great on everything,Berlin school em,jazz,rock,doo wop,etc.....
I've read adding weight to the passives will lower system
resonance resulting in a better bottom end.
Any suggestions?
corporalcripp
7 responses Add your response
darkmoebius
900 posts
 
A better place for classic Altec speaker advice is the Altec Lansing Heritage forums. That's where you'll find all the Lansing fanatics and experts. The main Lansing Heritage site has a lot of information about Altec, Lansing, and JBL classics.

Ask your question over there and I'm sure you'll get exactly what you need to know in no time.
audiokinesis
2,737 posts
 
Not knowing any more about the 890c Bolero than what you just posted, I presume they have a passive radiator.

Lowering the tuning frequency of a passive radiator will not necessarily give you a "better" bottom end. It will re-shape the speaker's low-end frequency response, typically raising the -3 dB point but making the rolloff more gradual. This may or may not be a net improvement; depends on what the in-room frequency response was to begin with.

Duke
dealer/manufacturer
corporalcripp OP
2 posts
 
Thanks for the replies guys.Duke,what you're saying could be worth trying for.A more gradual rollo0ff sounds reasonable since I'm not expecting thunderous subwoofer type performance here,just a firmer bottom end.
Now,to figure a way to do it.
johnk's avatar
johnk
1,975 posts
 
Place a large baffle round loudspeaker. Altec did this on many theater models.
corporalcripp OP
2 posts
 
Sounds interesting.What would this baffle be constructed from?
drunkenstepdad
4 posts
 
run them with a powered sub. submitted by: capt. obvious. i recapped mine, couldn't hurt.
johnk's avatar
johnk
1,975 posts
 
Plywood 3/4in or 1 in
Log in to respond
More to discover
80x80
Wilson Benesch Eminence
80x80
Revel REVF328BESIL
80x80
GoldenEar Technology Triton 2 Plus