2. analog
  3. 1198386276

Calling on B.A.T. VK-P10SE owners

I bought a BAT VK-P10SE here on Audiogon. The unit is fine but is missing the XLR shorting plugs used when connecting the turntable via the RCA inputs. I need to know which pins must be connected together. When I contacted BAT, they offered to sell me the plugs but not how to make them myself. So if a kind owner can check inside the plugs and tell me which are connected together I could listen to my new toy during the Holidays.

Thanks in advance and Happy Holidays to all Audiogoners!

Serge
goldorak

Showing 2 responses by piedpiper

piedpiper
753 posts
 
In case Rgurney's post wasn't clear, pin 1 is ground, pin 2 is positive and pin 3 is negative so that you will want to connect pin 3 to pin 1 with both then connected to the ground of your RCA. Connect pin 2 to the center pin of your RCA, leaving the center pin hot and pins 1 and 3 at ground.
piedpiper
753 posts
 
got it, thanks, RG.

Sounds like making them could be tricky then, but if you can figure that out then 1 and 3 would be the ones to short as stated above.
More to discover