Building an audio room - 12x22 - electrical plan?


I am at the pount of adding a new room which will be my audio room. It will be 12x22 feet with the audio on the short wall. While I would like to Go wider than this I do have size limits that I have to adhere to. The contractors will be adding electric to the room and I have not yet decided what to request. Based off of what I have read I am assuming that 2 20 amp circuits are the way to go. Any other recommendations? I am looking to add things now that will be easier done during construction then down the road.

I will also be adding a layer of Homasote sound barrier to the sheetrock to keep me toe tapping to myself. The floor will be carpet. Any other items to consider up front?
michaelkingdom

Showing 1 response by johnnyb53

Might I suggest you consider building your listening room to the golden ratio, which is 1.618:1? This would require minimal physical, but acoustically significant changes to the proportions of the room to avoid standing waves and enhance the sound at all frequencies and locations in the room.

To modify your present plans to the golden ratio, you could modify as follows:

If your longest dimension must be 22 ft, your short dimension would be lengthened to 13.6 feet and the ceiling would be 8.4 (~ 8' 5") high.

If 12' must be your maximum width, shorten the long dimension to 19.4' (19' 5") with a ceiling height of 7.4'.

This should make the speaker/room interface easier to tune, minimize standing waves and sickouts, and require less room treatment for a full, natural sound that is consistent throughout the room.

After all, George Cardas built his cable company on this principle.