Budget amp for Dahlquist DQ-10's


I'm currently trying to make some use of a pair of old DQ-10's I've had sitting around for years. They're in good shape but I know they're probably dated technology. Anyway I'm on a bit of a budget and would like some suggestions on power amps that could handle these hungry speakers but could also be found used for under $1K. Aragon 4004', McCormack DNA-1, Bryston 4B? I'm not really sure if I'm on the right track. Any help would be greatly appreciated.
mader315
Thanks for all the great suggestions. Although, I would have liked a used DNA 2,Threshold, or a Classe CA300 ect.. economics reared it's ugly head and I've got a late model Bryston 4B pro on the way. I've heard that the highs on these amps are a little much so I'm hoping that my cheapo Superphon Revelation II pre works out OK. It's ugly as hell but supposedly isn't a complete POS (but then again I may be wrong). If not, any suggestions for a low cost tube or ss pre that might mellow things out a bit? Thanks again.
You may be fine with the old Bryston, I don't remember my DQ-10's as ever being a bright sounding speaker. It's been a lot of years..don't the DQ-10's have Mid/Treb. controls on them that allow some adjustment? I may be thinking of another pair of speakers I used to own. Anyway, let us know when you get the Bryston hooked-up. The speakers may need some break-in if they have not been in use for a long time also.

Dave
Was curious to know if anyone out there was in the market to purchase a pair of dq10's with the dq-1w subwoofer and dq-mx1 crossover? I doubt I could ever replace the sound quality on my tight budget.

Any thoughts?
Update.
Well, the Bryston 4B Pro came in, and since it only had balanced inputs, I had to promptly cut the RCAs off one end of my cheapo Radio Shack Fusion interconnects and solder on a pair of XLRs. I fired up the 4b, Marantz 63 and the Superphon and I was ready to rock. Well the speakers weren't so ready. I promptly (within about 5 minutes) ate up the aging foam surrounds on the woofers. No problem, a quick call to Simply Speakers and one evening covering myself and the cones with rubber cement and I was ready to try out my bad ass beer budget stereo. The first results. Ugh! It had been over twenty years since I'd heard a pair of DQ-10's and at the time I thought they were the greatest thing since beer in cans. What had happened? My first thought was that six years of college had fried too many brain cells along with my memory.
Well I tried bypassing the pre, a little better but no imaging, went back to the pre, finally stopped using the CD inputs and tried the aux jacks, a small improvement. Spent the afternoon running through a series of CD's that sounded like crap. After about five hours of this torture (aided by a little port)I put in a John Prine cd and it was then that something started to happen. The vocals began to open up and the music for the first time became tolerable. Slowly over the next few hours the midrange started to fill in followed finally by the base. Wow, these things are finally starting to sound nice. What happened? I've heard of breaking in new components but all my stuff was used. There was nothing subtle about this change, it was like night and day. Is this normal? Thanks again for the advice and patience with all these newbie questions. BTW was it the John Prine? I somehow doubt that In-Sync would have had the same effect.
nice for me to read your experience. two weeks ago went for cleaning and sub reafoaming. until six hours of medium level volume functioning sounded as warm as before...

fsfb