Break-in procedure


Is there any downside in connecting one speaker out of phase with respect to the other during break-in (i.e., pointed at each other) or, by corollary, is there any directionality issue to consider if one speaker is out of phase with the other? I am also considering purchase of a Conrad-Johnson preamp that inverts phase- so I will need to make an appropriate adjustment in the cabling (my digital source does not have a phase invert feature). Is this an issue considering that the speakers have been running in an opposite (i.e. normal) configuration?
linkster

Showing 3 responses by drubin

Your pre-amp inverts polarity, not phase. You don't need to consider that, just connect one of the speakers out of phase. Presumably you are putting the speakers face-to-face and running them out of phase in order to cancel out as much of the sound as possible. If so, use a mono source. And be careful not to turn the volume up too high.

Not sure what you mean by directionality.
What difference would it make to work one speaker in the "normal" manner and one reversed during a break in? Range of motion is the same, and the speakers will see reversed polarity source material all the time anyway. If it's really a concern, reverse polarity between channels half way through the break in process.
If half of all records have polarity reversed, as many claim, how can this not be "normal use"?