My nearby HIFi store (remember those?) had a 40-foot piece of Mogami 2477 OFC copper coax 12gauge that was left as a sample by a sales rep. I bought it for $40 and took it home. Cut it in half, stripped the ends, twisted the core strands together, then the outer strands and added banana plugs. Core strands +, outer strands -. Looked real neat! Two twenty-foot pieces from amp to my KLH Nine electrostats. I kept that in use for over 20 years until I had to move south. I stupidly left the Mogami cable behind - but the movers brought the Nines to me safely in Florida. I thought the Mogami sounded excellent - no urge to change!i
Bought some 14/2 “speaker wire” from Home Depot
So I decided to amuse myself and on a recent trip to the Home Depot I bought some 14 gauge speaker wire. 25 ft for under $11.
I have what I think is a good system and my current speaker wires are analysis plus mesh oval 9 terminated in spades. My system is noted in my profile.
I substituted in the 14/2 I picked up- each leg is about 9.5 ft. Tinned bare wire at each end. I did use 4% silver solder.
Quite listenable, though perhaps not as extended at the high end. If someone told me I had to use the Home Depot wire I’d get along just fine. Leads me to one of 4 possible conclusions- 1- my hearing stinks; 2- my fancy Analysis Plus cables aren’t anything special; 3- my system isn’t resolving enough to make a difference; 4- given sufficient gauge, cable is cable. Of course, it’s also possible that my system is so good, any wire will allow that to shine through
Your thoughts, comments, etc appreciated
thanks
I have what I think is a good system and my current speaker wires are analysis plus mesh oval 9 terminated in spades. My system is noted in my profile.
I substituted in the 14/2 I picked up- each leg is about 9.5 ft. Tinned bare wire at each end. I did use 4% silver solder.
Quite listenable, though perhaps not as extended at the high end. If someone told me I had to use the Home Depot wire I’d get along just fine. Leads me to one of 4 possible conclusions- 1- my hearing stinks; 2- my fancy Analysis Plus cables aren’t anything special; 3- my system isn’t resolving enough to make a difference; 4- given sufficient gauge, cable is cable. Of course, it’s also possible that my system is so good, any wire will allow that to shine through
Your thoughts, comments, etc appreciated
thanks