2. speakers
  3. 186093-150037

Best way to clean glossy finish on speakers?

I have a microfiber cloth and distilled water and isopropyl alcohol. 
 

I can use all this to clean a TV screen and my glasses, but is there a preferred way to clean pristine glossy finish on speaker cabinets so that trace scratching does not appear?.

 

emergingsoul

Showing 1 response by tokushi

tokushi
53 posts
 

Certainly, cleaning glossy speaker cabinets requires a delicate touch to prevent scratching or damaging the finish. Here's a recommended method:

Materials Needed:

  • Microfiber cloth (soft and clean)
  • Distilled water
  • Isopropyl alcohol (70% or higher concentration)
  • Mild dish soap (optional)
  • Soft-bristle brush (such as a clean makeup brush)
  • Soft cotton or microfiber gloves (optional)

Steps:

  1. Dust Removal: Before applying any liquids, use a soft-bristle brush or a clean makeup brush to gently remove any dust and loose particles from the speaker cabinets. This helps prevent scratching while wiping.

  2. Preparation of Cleaning Solution: Mix a cleaning solution by combining equal parts of distilled water and isopropyl alcohol. If you feel the need for a bit more cleaning power, you can add a drop of mild dish soap to the mixture. Be sure not to use too much soap, as it can leave streaks or residue on the glossy finish.

  3. Testing: Before applying the cleaning solution to the entire surface, it's a good idea to test it on a small, inconspicuous area to make sure it doesn't damage the finish. Wait a few minutes to observe any adverse reactions.

  4. Dampen the Cloth: Moisten a clean, soft microfiber cloth with the prepared cleaning solution. It should be damp but not soaking wet. Excess moisture can seep into seams or joints and potentially damage the speaker.

  5. Gentle Wiping: Gently wipe the glossy surface using the damp microfiber cloth. Use light pressure and avoid scrubbing or aggressive motions. Follow the natural grain of the finish if there is one. This will help lift dirt and fingerprints without scratching the surface.

  6. Drying: Once you've wiped the surface, allow the speaker cabinets to air dry for a few minutes. If you notice any streaks, you can use a dry, clean portion of the microfiber cloth to lightly buff the surface.

  7. Final Touches: If necessary, repeat the process on any areas that still appear dirty. Ensure there's no excess moisture left on the surface.

  8. Fingerprints and Smudges: For particularly stubborn fingerprints or smudges, you can apply a small amount of the cleaning solution directly to the microfiber cloth and gently rub the affected area.

  9. Frequency: Regular gentle cleaning is better than infrequent heavy cleaning. Dust the cabinets regularly to prevent buildup.

  10. Protection: To further protect the glossy finish, you might consider using soft cotton or microfiber gloves while handling the speaker cabinets to minimize direct contact with oils from your skin.

Remember, the key is to be gentle and cautious while cleaning to avoid any scratching or damage to the glossy finish. Always test any cleaning solution on an inconspicuous area first, and if you're unsure, it might be a good idea to consult the speaker manufacturer's recommendations for cleaning and maintenance.

More to discover