2. tech-talk
  3. 1163632772

Behringer DEQ2496: Connection Options

I am eagerly awaiting delivery of a DEQ2496. Not being a sound engineer, I have some trepidation about the learning curve. For starters, though, I want to make sure I have the optimal connection configuration. The options seem to be (1) connect to pre-amp in an aux loop (e.g., as a tape deck) or (2) connect between pre- and amp. From what i can tell, the better restults are obtained with the latter configuration -- i.e., place the DEQ between the pre- and the amp with balanced connections going in the same direction as the existing connections. Is that right?

Also, will "standard" XLR ICs work with the DEQ or must I get special ICs/adaptors.

Thanks for any help.
jeffreybowman2k

Showing 2 responses by cwlondon

cwlondon
1,210 posts
 
Behringer gurus please help:

I have just rearranged my system and removed the Behringer from my desktop system, in order to experiment with the RTA and mic for my Levinson amp and Tympanis.

Therefore, I have connected:

IN R and IN L on the Behringer to the TAPE OUT 1 R and L on my SP-11 preamp?

and

Aux Out R and L on the Behringer to the TAPE IN 1 R and L on the preamp?

If this is correct, I would choose whatever input I want on the INPUT selector...and simply flip the switch to MONITOR rather than SOURCE to hear the Behringer device in the signal chain?

For some reason, I cant hear any difference or get the EQ to insert itself in the signal chain.

Do I need to reset the I/O settings on the Behringer?

Thanks for any advice. I sometimes get lost on this device, and I haven't actively used a tape deck since about 1980.

cwlondon
cwlondon
1,210 posts
 
It seems I was on the right track, and I somehow got everything working shortly after posting my question above.

This EQ still amazes me with its complexity, so any additional hints greatly appreciated.

Has anyone ever figured out the factory reset?

Thank you,
More to discover