Bare wire to B&W 684?


Am I supposed to string the bare wire directly through the hole in the terminal/binding post on the back? If so, do you recommend flaying the wire at the cut end once through and then screwing down to hold in place or not flaying the wire?

If you are not supposed to string the bare wire through the hole, not sure what step to take. The spades my Belden 5T00UP came terminated with are too thin to fit in the binding post and the wire at 10AWG is too thick to wrap around the post.

Appreciate any guidance you can give a budding audiophile!
apolkster
Post removed 
Post removed 
Apolkster,

I just purchased the exact same wire. Please tell me your thoughts when you get the hooked up.

Much Appreciated
Elizabeth, thanks for the advice. I set up tonight and am sure itll sound awesome. The help is much appreciated.

Pkelly, everything ive read on the wire says its a great value with sound comparing to some of the really expensive stuff. Ill give you my take once Im up and running.

FYI, im running B&K ST125.2 as a power amp, using the Peachtree Nova as a preamp, and the B&W 684 floorstanders as speakers. Heres to hoping it all works out!