Balanced vs standard power


Searching for an Isolation Transformer 10 or 15kva. I have the budget for Equitech but I'm sold only on the benefits of isolation and not "yet" on the benefits of balanced power unless one is recording live musicians. My rationale is that most if not all audio components are not designed with balanced power so they may be optimal performers with standard power and lesser performers with balanced power. Until someone does a side by side comparing isolated balanced to isolated standard power we may never know.

I have read the various threads regarding isolation transformers from Equitech 10wq, MGE Topaz etc, and the Euqitech stereophile review. For larger non-balanced options there is Ultra K 600 with K factor correction and triple shielding from the Controlled Power Company. They range from 5 to 25 kva.

I think supersizing Isolation transformers for audio is not well recognized yet because no one has done the necessary review/ comparisons to determine the performance curve of Isolation Transformer size to Audio Performance. Although Isoclean advocates the use of two of their Isolation Transformers for each piece of equipment. Maybe they're trying to tell us something or just sell more transformers. 10 KVA is "plenty" for my system according to Martin at Equitech, but "plenty" is not quantified enough to convince me, so I 'm leaning toward the 15kva on the Ultra K 600 from Controlled Power about $4000 vs Equitech 15 kVA at upwards of $14000.
natan6355

Showing 2 responses by 4krow

Jea48 THANK YOU! GOOD LORD, why don't we just hook a dedicated line from a substation. There is no doubt that this 15KVA is an overkill idea. I used to work with dc current 60-1,200 amps. requiring less than 1/4 voltage drop. For that kind of specification, we sometimes used cables as big as you'r wrist!(750kcml). I don't doubt that they engineered these battery circuits for very specific purposes. So when I see consumers buying bigger is better thinking, I know that there is an uneducated/greedy salesman lurking in the shadows. Yes, there is a great need for clean power, and balanced power is very effective for cancelation of noise. Yes, there is a need for adequate reserve, but don't you think that a DECENT piece of equipment(such as Levinson) considers that in their design? No doubt you should have low impedance, and the best(read tight) connections required. Yes can analyze this to death, but in the end, your ears are to be the judge and not some hype/misinformation.
I will say that, in a way, I envy your overkill of this power system. Most people seem to think that a plug in surge protector will do the job. The way that you have implemented the devices, i.e. not having them close to the HT/audio systems, is absolutely correct. I can't tell you how many times I have owned devices that made more physical noise than the electrical noise that they were trying to eliminate in the first place!
I took my situation as far as I could by having the secondary feed to the house replaced, as well as having three other houses replace theirs too. We all fed off of the same transformer. Then I replaced an old panel with a decent Square D panel. Then I ran a 10 Ga. dedicated line to the audio system. And finally, I use a BPT balanced device that uses 8 different secondary windings to help isolate one section from the other. Did it help, you bet. I am eager to see what positive effects that your method adds.