G; Thanks for the comment. I realize my next question is like pondering angels on pin heads, but I wonder how a VS115 amp (which is the type I own) would sound compared to a current REF 110 withthe old 6550 Winged "C" type. Care to speculate??
Audio Research VS 115 bias Adjustments
Any A-goners familiar with setting bias on the ARC VS115 power amp??
Just checked and set the bias on my VS115 amp. For those who are familiar with the process on this amp, I checked and adjusted the 4 "Set" ports to 65mV, as specified. However, the bias readings from the other 4 "Check" ports ranges from 63-71mV. While technically in "spec" (i.e., 57-73mV for the "Check" ports), I would have thought the range of bias readings from the "Check" ports would not have been that much. As you know, the bias voltage for the "Check" power tubes cannot be adjusted.
As an aside, I only use ARC matched tubes.
Does anyone know whether the range of bias mV readings on the "Check" tubes is normal (whatever that means) or otherwise could result in a denigration of sound??
Just checked and set the bias on my VS115 amp. For those who are familiar with the process on this amp, I checked and adjusted the 4 "Set" ports to 65mV, as specified. However, the bias readings from the other 4 "Check" ports ranges from 63-71mV. While technically in "spec" (i.e., 57-73mV for the "Check" ports), I would have thought the range of bias readings from the "Check" ports would not have been that much. As you know, the bias voltage for the "Check" power tubes cannot be adjusted.
As an aside, I only use ARC matched tubes.
Does anyone know whether the range of bias mV readings on the "Check" tubes is normal (whatever that means) or otherwise could result in a denigration of sound??
- ...
- 27 posts total
- 27 posts total