I am using Benz LP-S (0.35mV at 3.54 cm/s) and Ortofon Quintet Black (0.3mV at 5 cm/s) with my REF Phono 2SE, both of them using high gain setting. The 2SE is connected to a fully-balanced Bent passive autoformer preamp using XLR. All components are connected to Torus AVR30 (230V AC). For normal listening, the preamp is set to around -30 to -20 dB, depending on the records. No hum, very quiet, almost like solid state. I can hear slight, faint gain noise only if my ear almost touches the speaker driver.
Audio Research Ref Phono 2SE owners - having hum problems with LOMC/Koetsu Any ideas?
Hello
Continuing to have a lot of ground loop like noise with Reference Phono 2SE using .2 MV output Koetsu into Spectral 30SV preamp and DMA-260. Any ideas? Feel like I have definitely isolated this to the phono stage as noise is not present on any of the other inputs.
Note: Due to LOMC, I have to turn up volume to 2/3 for loud music playing and getting lots of hum when no signal is playing at that level. Up to 1/2 volume, there is very little noise; tempted to move to higher output MC such as Lyra Titan, but Koetsu is near new, only 200 hours. Have dedicated circuits, grounded together at the box, and disconnecting tonearm cable to phono preamp or taking turntable motor out of the system does not make any difference.
Please let me know of any suggestions or if this is the how the Ref 2SE is.
Thanks,
Carl
Continuing to have a lot of ground loop like noise with Reference Phono 2SE using .2 MV output Koetsu into Spectral 30SV preamp and DMA-260. Any ideas? Feel like I have definitely isolated this to the phono stage as noise is not present on any of the other inputs.
Note: Due to LOMC, I have to turn up volume to 2/3 for loud music playing and getting lots of hum when no signal is playing at that level. Up to 1/2 volume, there is very little noise; tempted to move to higher output MC such as Lyra Titan, but Koetsu is near new, only 200 hours. Have dedicated circuits, grounded together at the box, and disconnecting tonearm cable to phono preamp or taking turntable motor out of the system does not make any difference.
Please let me know of any suggestions or if this is the how the Ref 2SE is.
Thanks,
Carl