Audio Experience tube preamp

yes I have to sell mine because it just doesn't mate up with my SS amp. It sounds wonderful but it makes my system have hum and hiss that I didn't have with my Conrad Johnson PV4.

I myself own the Audio Experience MK3 tube preamp. I run it into my MCS 3125 stereo receiver (the top of the line receiver built for JC Penny's private lable, which sports a triple darlington, triple differential SEPP OCL output stage capable of "over 200 watts per channel" according to the manual, the specifications still rival some of the top gear of today), I didnt want to lose the power of the solid state design but wanted the sound of vacuum tubes so I bought the MK3. Comparatively speaking the MCS 3125 sounded great to begin with, clear, powerful dynamic. I hooked the MK3 up to the MCS 3125 when it arrived and was quite surprised by the sound, it sounded great and detailed, I spent several hours listening to some of my favorite stuff it never disappointed. Out of mere curiosity I ordered a bunch of NOS 5Y3 tubes (these are readily available and relatively cheap) as well as a set of NOS 12AX7s. I tested a vintage Raytheon, Arcturus, and then a Philco as the 5Y3s. Tossing in the Philco was an experience I will never forget, the sound quality difference was tremendous, louder more dynamic bass was deep solid, treble was clean crisp and smooth, quite surprising. It sounded far superior to the Sovtek that is included. The Raytheon actually sounded worse than the Sovtek, the Arcturus was only slightly less good than the Philco, I have a NOS GE and RCA as well but the Philco sounded so good I never tried them. The 12AX7s I got were a set of late 50s GEs, I removed the EIs and popped these in, they sounded slightly different but not substantially different just a tad bit better (smoother bass) but nothing to write home about. I think the 5Y3 is quite important to this preamp, and I wouldnt hesitate to suggest trying a different 5Y3 in it, I think one will be quite surprised with just how much different it makes the sound. Last night I finished fixing up a Masco tube amplifier I got at the flea market, which used 4 7C7s, a 7N7, a 5U4 rectifier, and 2 6L6 outputs, and put it up to the test in comparison, it was more fluid than the solid state MCS 3125 with the MK3 but not that much different. This unit is a tremendous value for the money and the build quality is exceptional for the price. I wouldnt hesitate to recommend it.
My system is as follows-
MCS 3125 receiver
Marantz SD6000 cassette
Garrard turntable
SMC 330s DVD/CD player
Audio Experience MK3 preamp
AR 226PS speakers
Linaeum tweeters
AR S112PS subwoofer

I purchased the symphonies pre-amp in Dec. 2002. It's teamed with a carver 1.5t ss amp. I utlize a satelite subwoofer system. The subwoofer is powered by a separate ss amp. The sound is truly remarkable. It really warms up the solid state sound and it delivers a great value in my opinion. Of all the things I've added over the years this one product has probably made the biggest difference improving the sound. One other note, I found that I had to ground splitters in my cable system as my stereo is connected to it via my hi fi vcr. Before grounding I noticed a hum in the system. Grounding greatly reduced it. When listening to music I unplug my cable line. Then it is dead silent.

In a followup to my own review of this unit I have given this unit a substantial amount of playtime and got the opportunity to compare it to a vintage preamp. Still using the Philco 5Y3 and GE 12AX7s I have given it a good solid burn in and it sounds exceptionally good. It seems to warm up a bit as it burns in. I recently obtained an Electrohome VA-100 MK2 preamp from the 50s or 60s and tossed in the best possible tube compliment I could come up with for it, a pair of RCA 12AX7s and a TungSol 6X4WA rectifier. I initially tried this with a Fisher RS-1058 stereo receiver but recently obtained what may have been the biggest Fisher receiver out of the 1970s, the RS-1060 which tips the scales at a whopping 57lbs. Again like the MCS 3125 I use with the Audio Experience the RS-1060 is a clean sounding powerful reciever, using bipolar outputs instead of the triple darlington outputs of the MCS 3125. The Electrohome sounded smooth as silk with the tube setup I have installed, it has a compelling characteristic that makes you want to listen more. I compared this to the MK3 as it initially sounded (Ei 12AX7s and the Sovtek 5Y3) and would have taken the Electrohome in that scenario. With the NOS tube compliment in place the Audio Experience MK3 was equally smooth and warm yet substantially cleaner, powerful and dynamic. Let this be a further note to all to experiment with different tubes in this unit. It may not seem like it could make much difference but as I previously had noted replacing the 5Y3 Sovtek with the Philco was like listening to two entirely different preamps.