2. digital
  3. 1016160266

AT&T ST to Toslink connectors ...

I just bought a Wadia 9 DAC, it has the AT&T ST type
of connectors for digital inputs, and it only has these
types of inputs . Being the idiot that I am, I didn't
check to make sure that my transport has the same type
of connector for digital output. Well, the transport
(Sony SCD-1) has the toslink digital output.

Here are my questions:

1 - Would it be possible for me to get an optical cable
that has the toslink connector on one end and the AT&T ST
connector on the other end ? Where could I go to get such
a cable or have it custom-made ? For this purpose, do I
need single-mode or multi-mode fiber optic cable ?
2 - Would the optical signal format be compatible between
these two ? Assuming I could find such a cable, would the
transceiver on the DAC be able to decode the signal sent
out by the transceiver on the transport ?
3 - What other options do I have, assuming the cable with
the two different types of connectors doesn't work ?

I would appreciate very much any help you can give me.
It is kind of painful to pay bucks for something that
you can't use ... |^(

Tony
averagejoe77

Showing 2 responses by ghostrider45

ghostrider45
449 posts
 
Glad Steve at great Northern could help you. Wadia actually made a companion piece to the 9 to convert inputs from coax, TOSLINK, etc to ST. It was an update from the similar box that was made for the Wadia 2000, and was designated the Wadia 10.

I've never seen one on AudioGon.

Enjoy your 9. It's a great DAC. I'm running a Wadia 7 thru Genesis Digital Lens to a Wadia 9.
ghostrider45
449 posts
 
I don't think you'll be able to stick an AT&T fiber into a TOSLINK connector. Even if you mechanically get it in the connector, the systems operate on different optical wavelengths.

There are a number of jitter reduction devices (such as the Geneis Digital Lens) that have coax and TOSLINK inputs and have ST outputs. One of these will solve your problem nicely.
More to discover