Arcam A85 / EPOS ESL3's sounding too Bright

I would tend to agree about the Arcam/Epos combo. I has Epos M12 and with the wrong SS gear would be bright due to the metal tweeter. This was mentioned in the reviews about them as well. I heard the Arcam, great amp, lively, detailed and basically neutral. Are the ESL tweeters metal?

You may want to try taking the edge off via different cabling. Discovery cables as an idea. Also, give the Cable Company a call, for a small deposit they will let you demo various cables at home. You don't lose your deposit, you can then apply it to a purchase with them.

Good luck,

PS - You could also switch amps to a Creek amp, like the 5350SE (which is what I had). It might be easier to switch speakers though.

If the tweeter is the culprit, you can add some sort of "sponge" ring or audio foam just above and below the tweeter, this solution might tame an overly aggressive tweeter.

As I said before, cabling might be adding to the problem.

I swapped out my Audioquest Copperhead RCA interconnects with a pair that my dealer made, and the edge was gone, but since the dealermade cable was belkin 75-ohm video cable, I lost some detail, clarity and the midrange was muffled. I think the interconnects are the culprit. The Copperheads have very nice detail, but they are way too bright for my ears. What do you guys recommend? I don't want to lose the detail and resolution.

Thanks!

If it was a cable that produces edginess, I was referring to the speaker cables and not the interconnects. Monster cables for wiring are known to be edgy.

DEFINATELY THE MONSTER SPEAKER CABLES. I WOULD SUGGEST YOU TRY CARDAS GOLDEN CROSS.I USED IT WITH MY ARCAM AND FOUND IT TO BE A PERFECT COMBINATION.