Anyone Experienced With Revel Gems and Sub15/LE1

Hmmm...thanks for the info, I had no idea. The Sub30 is out of my price bracket unfortunately. The LE1/Sub15 I could get at a good price from the person I originally bought the Gems from. I am also fairly limited in terms of choice as I am in South Africa, not the US or EU.

Would you perhaps recommend getting an alternative powered subwoofer to match with the Gems? If so will I still be able to use some form of crossover to limit the low frequencies sent to the Gems (I assume that the crossovers would be part of the subs)?

If so, what would be the best way to connect the system together? I will be getting amplification too so I now have a choice of either getting an integrated amp or a pre/power amp. Would it make much difference which I go for (other than the added cost of going separates)?

X

Unless you are really playing LOUD, I would run the Gems full-range.

Most subwoofer on-board crossovers do more to degrade the sound than improve it.

You would need a preamp with two sets of outputs to run the Gems full range. One set of outputs to the amp for the Gems, and the other set of outputs to the subwoofer. The lower you set the high pass control on whatever sub you get the better.

These are my thoughts, others I'm sure will have different suggestions. Best of luck no matter how you do it!!

Paul :-)

I can confirm the problems with the LE1. Bought it in 1999. Went bad in 2004. The worst thing was that I had to send the whole amp from Europe to the States. They exchanged the crossover module which is a much better design now (in view of the board and electronical parts) and better sound as well. Since the repair no problem whatsoever. So you should make sure you'll get the latest version of the module! I run my Ultima System directly from Wadia's 27ix into LE1 which is feeding the McIntosh MC 2000. The sound is superb! I also tried your setting #1 using the Burmester 808 pre and feeding the GEMs and Sub seperately. Not bad either but the above setting is superior. I only can encourage you in view of this speaker system. I haven't found a bettter speaker system for classical music and jazz (along with the McIntosh tube amp and Kimber Select 3035, 1130) so far and I guess I stopped searching - which means true High End, right? Good luck!

Hi guys. Thanks for the responses! Are these reported problems with the LE1 specific to the crossover? In other words, would using (as suggested above) the Gems in full range along with the LE1/Sub15 combo give the desired results (by bypassing the crossover in the LE1)?

If that were the case, what I planned to do is get a very good integrated amp which has pre-outs/sub-outs. I will then connect: source to integrated amp, amp to Gems with speaker cables, pre-outs to LE1 with interconnects, LE1 to Sub15's. Oh and BTW I do means Sub15's in the plural: the person I can get it from has the complete combo (LE1 with two Sub15's) which is one of the reasons I am so drawn to complete the package that way.

Alternatively I believe I would look into another subwoofer such as a Rel or Velodyne. If I do so, would you still suggeset running the Gems full range as described above (integrate amp and pre-outs)?

Cheers,
X

No, the Revel Sub is the one! It's incredibly good. And yes: the probs seem to stem from the crossover module. In my case anyway. The only thing that I wouldn't know is how to circumvent the crossover module since it's part of the whole amp and pulling it out definitely cuts the circuit.
By the way: I tend to disagree with the thought that the GEMs alone are real fullrange setting. They do need the Sub IMHO
Good luck!