Any comments on Synergistic Research Atmosphere

I just noticed a reference to the High zfidekity cables ct-1 which has not been made for  well over a year ,Thst is why I mentioned Any of their CT-2  line it is
is night and day better then their original design going back from 2012 they learned a Ton  about improving magnetics  in 6 years . It works like a wave guideElectron microscope works almost the same all theelectrucal signal is riding on both. Poles by focusing the signal to the center dramatically lowers distortion
and energizes the electrical  signals down stream the only drawback is breakintime takes an honest 4+500 hours to get fully settled in if buying new
I auditioned from the cable Co. then it took roughly about 30 hours to reenergize
in my system but was a revelation in realism  .myself being in audio forover 40
yesrs thought I have heard it all. These are keepers . 

@audioman58

Not sure you realize how old this thread is lol

I as well have just auditioned the HFC CT2 interconnects and was shocked how much better they were compared to the Reveal line. Very clear, smooth and does not highlight the treble region like a lot of cables. Seems like no one talks about them much anymore..HFC that is.

As far as the SR Atmosphere line, I have heard goods things about them and would like to try a pair one day.

Can the lead that needs the be grounded from the interconnect be plugged into my power bar, or must it be the wall outlet?

@riverboat. The answer is No if the same power strip also has the Atmosphere plugged into it, but yes if the power strip is on a separate leg of the same duplex as the Atmosphere power supply and is shared with other components. 
It’s easiest to think of it this way. The At,o sphere should always be connected to a duplex outlet with one connection (power) to one half of the duplex and the other (ground) to the other half.  Either half can share the connection with any other components without concern. 
You’ll find more of my experiences in this thread
https://forum.audiogon.com/discussions/synergistic-research-black-box/post?postid=1808997#1808997

hi folk. my question this time was about the grounding cable that comes Atmosphere level 2 interconnects that are not actively powered. In this case could the lead be connected to my power bar?