analog newbie


i am seriously considering getting into the world of analog playback. right now i lack a phono stage, but will likely purchase the tube stage for my rogue 99 preamp, to avoid the expense of a chasis and phono cables. i want to make sure vinyl is something i will continue to collect before making a real investment.
after the rogue phono stage is bought i will have little budget for a new turntable so i am considering using my fathers kenwood table that dates back to the early 1980's, i know it is operational as i used it at least once when i had a preamp w/ phono stage a few months ago.
a few years ago i replaced the cartridge with a grado model, about $50-60, don't recall what model.
i am concerned about damaging some of my lps, particularly about a dozen or so blues lps that were hard to find (hopkins, sonny terry, brownie mghee, memphis slim, furry lewis, etc) the vinyl seems to be in decent condition and i'd like to keep it that way.
so i figure i should replace the cartridge with a new one at about the same price point since this is no kick-ass table.
what can i do on a tight budget to protect my lps, most of which probably need to be cleaned very well before another playback. i was using the simple discwasher system but i get the feeling this was removing surface dust only, and moving it around more than from the lp surface.
can anyone recommend a handwash regimen, in detail as i am a vinyl neophyte, or some other tried and true lp maintenance system to prolong/preserve lp playback?
or am i simply better off with a cleaning machine? some seem to prefer handwashing for truly dirty lps i think and machines for basic maintenance thereafter, do i have this right?
also, what basic tools/accessories should i have on hand for vinyl playback, now or in the future as my budget allows me to become more and more serious.

down the road, if i find vinyl to be something i enjoy, i currently plan on purchasing a basis/graham combo with a decent cartridge from dynavector, ortofon, etc.
fujindemon
don't use *any* kind of wet-cleaning system without a vacuum. there are those who disagree with me, but it's been my experience that if you wash it without sucking it out, then the dirt just seeps deeper into the grooves and is harder to remove later. get a nitty gritty record cleaner. they're wonderful little machines and they reduce the noise floor on dirty lp's. but, also use them sparingly. the best way to clean an lp is to let the stylus collect the dust, and then to clean it from the stylus.
Post removed 
I agree with Lazarus, although I have read positive comments about the Disc Doctor products, but I have only tried their stylus cleaner.
You may not get the best results with an old Kenwood, since it is probably a direct drive unit and may have excessive noise, etc. Check out the Musical Fidelity models starting at $300, as well as the models sold used here on Audiogon.
I'm from the old school: liquid Ivory soap applied with a fine sponge then thoroughly rinsed form the record surface. Regarding the Discwasher System, most people do not know how to use it and then blame the tool...I was one of those. Yo should NOT wet the record surface or apply pressure. The fluid's purpose is to moisten the fibers so that they can pick up dust without creating too much static. The pad is rotated to facilitate dust pick up as it is consistently moved in the direction of the arrow. Simple, isn't it?

According to Albertporter, the Nitty Gritty scratches records.

Record wear will depend on two things:

1) Record/stylus hygiene.
2) Proper cartridge mounting and calibration.

Get the tools to do the job right.
nitty gritty does not scratch records unless you mix sand or broken glass into the cleaning solution.

the library of congress uses them to keep their classic vinyl clean. they wouldn't do so if it were scratching them.

besides that, i know from firsthand experience that they don't.

don't use a wet system without a vacuum. you're just moving the dirt from the surface (where it's okay to to have it) into the grooves (where it will make noise).