I just purchase sealed albums, listen to them 5 times (they sound best the 4th or 5th play) and then throw them away. I'm not wasting my money on fancy cleaning gizmos.
analog newbie
i am seriously considering getting into the world of analog playback. right now i lack a phono stage, but will likely purchase the tube stage for my rogue 99 preamp, to avoid the expense of a chasis and phono cables. i want to make sure vinyl is something i will continue to collect before making a real investment.
after the rogue phono stage is bought i will have little budget for a new turntable so i am considering using my fathers kenwood table that dates back to the early 1980's, i know it is operational as i used it at least once when i had a preamp w/ phono stage a few months ago.
a few years ago i replaced the cartridge with a grado model, about $50-60, don't recall what model.
i am concerned about damaging some of my lps, particularly about a dozen or so blues lps that were hard to find (hopkins, sonny terry, brownie mghee, memphis slim, furry lewis, etc) the vinyl seems to be in decent condition and i'd like to keep it that way.
so i figure i should replace the cartridge with a new one at about the same price point since this is no kick-ass table.
what can i do on a tight budget to protect my lps, most of which probably need to be cleaned very well before another playback. i was using the simple discwasher system but i get the feeling this was removing surface dust only, and moving it around more than from the lp surface.
can anyone recommend a handwash regimen, in detail as i am a vinyl neophyte, or some other tried and true lp maintenance system to prolong/preserve lp playback?
or am i simply better off with a cleaning machine? some seem to prefer handwashing for truly dirty lps i think and machines for basic maintenance thereafter, do i have this right?
also, what basic tools/accessories should i have on hand for vinyl playback, now or in the future as my budget allows me to become more and more serious.
down the road, if i find vinyl to be something i enjoy, i currently plan on purchasing a basis/graham combo with a decent cartridge from dynavector, ortofon, etc.
after the rogue phono stage is bought i will have little budget for a new turntable so i am considering using my fathers kenwood table that dates back to the early 1980's, i know it is operational as i used it at least once when i had a preamp w/ phono stage a few months ago.
a few years ago i replaced the cartridge with a grado model, about $50-60, don't recall what model.
i am concerned about damaging some of my lps, particularly about a dozen or so blues lps that were hard to find (hopkins, sonny terry, brownie mghee, memphis slim, furry lewis, etc) the vinyl seems to be in decent condition and i'd like to keep it that way.
so i figure i should replace the cartridge with a new one at about the same price point since this is no kick-ass table.
what can i do on a tight budget to protect my lps, most of which probably need to be cleaned very well before another playback. i was using the simple discwasher system but i get the feeling this was removing surface dust only, and moving it around more than from the lp surface.
can anyone recommend a handwash regimen, in detail as i am a vinyl neophyte, or some other tried and true lp maintenance system to prolong/preserve lp playback?
or am i simply better off with a cleaning machine? some seem to prefer handwashing for truly dirty lps i think and machines for basic maintenance thereafter, do i have this right?
also, what basic tools/accessories should i have on hand for vinyl playback, now or in the future as my budget allows me to become more and more serious.
down the road, if i find vinyl to be something i enjoy, i currently plan on purchasing a basis/graham combo with a decent cartridge from dynavector, ortofon, etc.