Amps for Totem Model 1

Supposedly SimAudio amps are what Vince B. used when testing/building the Totem range. They have an excellent integrated (the I-5) and great seperates too (the Moon W-5) I have totem forests and have auditioned with the I-5 and was impressed. Good luck. Alos, don't underestimeate the juice needed for those model 1's...they're small but they need watts!!

I'm currently using a Bryston 3B-ST with my Model One Signatures with great success. The speakers sound dynamic, musical and authoritative with no hint of strain. Since the Model One's are a 4 ohm load, I would not recommend using the Moon I-5, they just do not deliver enough wattage. However, I did audition the Model One's with a Moon W-3 and W-5 amplifier and the results were just stunning!!

I have been using a Densen Beat B-100 integrated amp with my Totem Model 1's for 3 years now. The Densen runs about $1200 but can be had for less. This is a second system for me; in fact I am using it with my Sony WEGA TV and DVD player. This combo is sweet to my ears and images well. The Densen is rated at 60W into 8 ohms and 120W into 4, which is the nominal impedance of the Totem - plenty of power. Check it out if you can.

Try Plinius 8150i, had great sucess with it