Alternative absorbent acoustic material?


I finally read the owner’s manual that came with a pair of speakers I bought last spring (Revel M126Be) and there is a a couple of paragraphs that talk about treatment materials. Revel states that: "There are numerous options for absorbent material. None are superior to low-cost fiberglass." And it goes on to say that "It is important to use absorbers that are at least 4 inches thick, to avoid altering the spectral response of the loudspeakers." It also says that "Sculpted foam is less efficient" and needs to be "at least 8 inches thick."

I assume that the low cost fiberglass that Revel is referring to is the insulation that comes on a roll that is available from, for example, Lowes? Has anyone tried this, and if so how did it work out?

 

immatthewj
Post removed 

The other posters are correct re: Owen’s Corning 703.

Of course, any mineral wool/rockwool that is high density is fine (i.e., Rockwool (100kg/m3 or higher).

The reason to use other materials is sometimes rockwool can absorb too much or you specifically want a frequency range to not be absorbed.

Or, more likely, you don’t want to work with rockwool, which is a PIA to deal with, mildly dangerous if you are an idiot, and can really make a mess.

I heard a room at a shop that was extensively treated with Dow Corning fiberglass panels with Dow Corning supervising the design/installation.  This room, at a local audio store was intended to showcase such treatment.  The result, to my ears was odd sounding and too dry and dead sounding.  Musi9c was clear and detailed, but sort of lacking in liveliness and energy.  To me this was excessive damping, but, I have no idea what a lesser level of treatment would sound like.