2. analog
  3. 163217-89448

Allnic 1201 replacement tubes?

Hello all ...I have an Allnic 1201 phonostage and I think the Mullard E180CC’s are nearing the end . Should I pick up the same NOS Mullards are there alternatives where I won’t lose performance? 
Also they seem difficult to pull . Like they are loose at bottom and will just rip apart but I might be overthinking it..? Thanks 

VPI super prime scout 
tekton encore
manley snappers / jumbo shrimp
tommypenngotti

Showing 7 responses by tommypenngotti

tommypenngotti's avatar
tommypenngotti OP
221 posts
 
@francozi 
no problem , he is an Audiogon member , search his name above and scroll down , you'll find his actual posts where you can message him. 
tommypenngotti's avatar
tommypenngotti OP
221 posts
 
@francozi 
I’d come contact Albert Porter , he’s your man . Hooked me up with new Allnic 1202 , great guy . Good luck ! 
tommypenngotti's avatar
tommypenngotti OP
221 posts
 
thanks guys ...Albert Porter also explained about the gel platform ...I bought this used and don’t think I have the tube puller . Albert recommended something wood of plastic to pry So I don’t get a voltage shock from built up caps . Thanks
tommypenngotti's avatar
tommypenngotti OP
221 posts
 
@tooblue 
I did ask Albert , he didn't know anything other than standard warranty replaces tubes within a year for free... 🤷🏻‍♂️ thanks 
tommypenngotti's avatar
tommypenngotti OP
221 posts
 
@pops I found the tool , it is very difficult to pull tubes , you’re right ! What a hassle . On top of that , now my left side is acting up , low volume and not as full , like a cold solder joint , 😫 even changed tubes , same result . 
tommypenngotti's avatar
tommypenngotti OP
221 posts
 
@lewm 
pretty sure its a cold solder joint in my Manley preamp , it seems to have gone away for the time being ...

I've swapped tubes L/R , its really intermittent ...
tommypenngotti's avatar
tommypenngotti OP
221 posts
 
@francozi
I would contact Albert Porter on that , he's the expert...good luck!
More to discover