2. speakers
  3. 1214053310

Advice in packing Kharma 3.2s. Please help.

I need to pack my Kharma 3.2s and was wondering
about the procedure to take them off the SDDS stands.
What is the sequence of steps? Do I take the bolts off
while they are standing, or place them on their sides
first? When do I unscrew the feet? This and any
thoughts about how to maneuver them into their crates
would also be great. Thanks in advance!
rgs92

Showing 3 responses by rgs92

rgs92 OP
974 posts
 
Yes--I hate wood crates. Same problem with my old Watt Puppies. I managed it by putting the crate on its end
and "walking" the speaker upright into the crate,
then laying it on its side (after wrapping in in heavy
plastic. 'hope this tip helps others out there.
Thanks.
rgs92 OP
974 posts
 
THANKS!! I assume that the bottom plate stays attached,
and the 4 spike plates are the only things that get detached.
Instead of turning it completely upside down, could it
just be placed on a raised cushion with the plates hanging
off?
Thanks again for your help.
rgs92 OP
974 posts
 
Yep, I did finally take a good look and found the manual
and see how it works. Thanks again.
(The hard part is
slipping them into their crates... I don't think I'll ever
buy a speaker again if it's packed in wooden crates.
OMG, it's like fitting a giraffe in a Volkswagen.)
More to discover