There is no "polarity" with single phase AC(125-130V/60hz house wiring). You've got a hot(usually black) wire, neutral(usually white), and hopefully an earth ground. An outlet can be "out of phase" with regard to other outlets in the house, if it's not wired according to code(hot wire from the breaker on the outlet's brass colored screw, neutral on the nickle). You can have your electrician wire the new outlets to the same breakers, and if you're really worried about RFI/EMI being picked up by the old wiring: just have him disconnect it from the breakers. Adding ganged breakers wouldn't affect anything negatively, but you'd still have the possiblility of noise being picked up by the old wiring. Of course: everything that's on-line between the generating station and your home is contributing noise to your AC anyway. Get a Richard Grey Power Company, Chang Lightspeed, or Audio Magic Stealth XXX(what I use)power conditioner, and you won't have to worry about noisy AC anymore.
Adding a second power outlet to existing one.
Just over a year ago I had installed two dedicated 20 amp runs from my main circuit box for dedicated audio use. I had each run end with two Pass and Seymour 5262A duplexes giving me a total of 4 outlets. I've been very happy with the result but have now had to reconfigure my systems location to the opposite side of the listening room. I would need very long power cables to reach equipment! so am wondering what would be best . Can I just ask my electrician to just add two more runs of cable from the same points on circuit box to a new location therefore doubling up ( although I would only ever use new location) on the two 20 amp circuits .Or would it be best ( for sound quality) even though it would take a little more work and have him remove the original wiring totally and then reinstall to the new location in living room? I have no more room in on my box for 2 new extra lines. Hope this question makes some sense! thanks in advance.