Accessing Belt on Immedia RPM2 Turntable

Thanks for the source of the info.  I shall go to the Vinyl Engine and print out the relevant information.  The problem Is the platter won’t turn when the toggle switch on the power supply is flipped to the play position.  I have to locate the source of the problem first.  The second part of the problem is just me.  As I said I apologize for my ignorance in addressing audio related problems.  I’ve never had an issue with the turntable in 25 years (I can’t remember exactly when I bought it).  I haven’t even flipped the turntable over yet, since I have to remove the tonearm and empty the oil reservoir.  I was just perplexed 🧐 on how the whole thing comes apart and was wondering if someone might lead me to the most common source for the platter not turning.  
 

I’ll get back to everyone on how I am doing in fixing the problem and seek any further advice if I need it.  

I’ll be more thoughtful and try to be better prepared and do more research going forward if I have an audio related problem.  Mea Culpa.  

I was not meaning to criticize you in any way.  I was only pointing out the readily available source of information, which would be the owners manual.  That's the place to start. If that doesn't tell you what you need to know, then perhaps is the time to ask for outside help.  You might also post an inquiry on Vinyl Asylum.  There are many graybeards there with esoteric knowledge.

I actually had a copy of the RPM2 tonearm information from the The Vinyl Engine.  Apparently I had registered a very long time ago as I had a username and password.  However due to inactivity, my account was suspended.  This requires me to reregister.  However, The Vinyl Engine has been closed to new registrations because of "abuse of its policy of free information".  So I am unable to obtain or even look at the manual for the turntable on The Vinyl Engine.

I will seek information from Vinyl Asylum and see if someone can direct me to a source for the manual for the Immedia RPM2 turntable.  

If you know of a source for the manual, please let me know.

Thanks.

I think you can buy it from another on line source for $5. Same thing happened to me with VE.

I looked at Vinyl Engine for you. There is no information for Immedia turntables there.

I looked up Immedia, and they are the distributor for Spiral Groove turntables. I don't know if these are the same or a different take on the Immedia. It might be a place to start

https://www.immediasound.com/

• https://www.immediasound.com/