A Question on Speaker Driver Efficiency

I have been tweaking my guitar amps, by upgrading the speakers.

I installed a larger speaker (was 8" now 10") in my bass amp, but I made sure it was very efficient - net result
- not only is the bass much deeper sounding,
- but because the new driver was more efficiant I now play at a lower volume.

So I am now considering upgrading my other amp (i.e. used for my 6 string) and got to thinking about building a new cabinet that houses two speakers.

I know that connecting the speakers in ...
- series will double the impedance, i.e. 2 x 4 ohms would have an onverall impedance of 8 ohms
- parallel will halve the impedance, i.e. 2 x 16 ohms would have an onverall impedance of 8 ohms

But what I have not been able to get my head around is...
- what will each connection method (i.e. series or parallel) have on the "combined" sensitivity rating?
- e.g. if both speakers are rated at 96db sensitivity, will the overall sensitivity change due to the connection method or remain at 96db?

Since I can get 4 ohm or 16 ohm drivers - which connection method would be best? series or parallel?

in case it is a factor
- the amp is 15 watts into 8 ohm
- I am looking at employing two identical drivers each rated at 96db sensitivity
- 96 db (or higher) is the target for the combined sensitivity

Any help is appreciated - Many Thanks Steve