In general, I would agree with Baroque Lover and Markphd on this one. I think the price of most wire out there is ridiculous, compared to the effect on the system. I would also say that in many cases, an "improvement" heard when switching out wire in a system is simply due to the fact that the electrical connection becomes cleaner when putting in a new piece of wire. I think there are many audiophiles who switch out wire way too frequently, when all they really need to do is clean their connections. I am not saying wire is not important, just that many consider it too important. As was said earlier, there is a reason dealers are quick to suggest wire as an improvement for a system - something to do with an extremely high profit margin.....
A Perennial Debate For Which I Seek Help
Wire, Terminations, Dielectric, Solder, in summary, the linkages in our systems, the terminals in the path. Doubting your cabling can only lead to paranoia, and thus, fearing the snub of fellow audiophiles, you shun the Tuesday night shootouts, the gatherings that once made Tuesdays better than Fridays. Please, don't shun the shootout, I know of no gathering more intoxicating. They remind us we are alive and human, no mere beast in search of flesh and sustinance alone.
My Situation - I recently had a pair of speakers upgraded with new caps, chokes, posts, wire, etc... Not until I went to install the reworked crossovers, however, did I realize how cheap the connection was at the drivers. The woofer has a small terminal board mounted on the basket where the lead wires attach to two stamped rivets. The rivets and brackets are both loose. These clips are followed by a 3" wire to the woofer, some sort of tin-coated cotton or wiring of similar texture and tensility.
As for the tweeter, one of the even smaller pins used for the lead wires snapped off. I could try to solder it back on, yet more fundamentally, with all the money spent on speaker cables, IC's, perhaps hundreds on binding posts alone, aren't these shoddy driver terminations, hidden inside the cabinet, an egregiously weak link in the chain, or am I missing something specific about this particular connection? Any insight is truly appreciated.
My Situation - I recently had a pair of speakers upgraded with new caps, chokes, posts, wire, etc... Not until I went to install the reworked crossovers, however, did I realize how cheap the connection was at the drivers. The woofer has a small terminal board mounted on the basket where the lead wires attach to two stamped rivets. The rivets and brackets are both loose. These clips are followed by a 3" wire to the woofer, some sort of tin-coated cotton or wiring of similar texture and tensility.
As for the tweeter, one of the even smaller pins used for the lead wires snapped off. I could try to solder it back on, yet more fundamentally, with all the money spent on speaker cables, IC's, perhaps hundreds on binding posts alone, aren't these shoddy driver terminations, hidden inside the cabinet, an egregiously weak link in the chain, or am I missing something specific about this particular connection? Any insight is truly appreciated.