The speakers appear to be 8 ohm 90 dB from a stereophile review. They dip to 3.2 ohms, which isn't bad. The amps would drive them with no trouble in any reasonable sized room. I cannot comment on pricing until Spatial Audio figures out all of their costs. I would expect $15,000 - 20,000 per pair with premium tubes, but that might be off a bit. There will be an announcement after the Seattle show in the spatial audio lab website once it is all figured out.
300b lovers
I have been an owner of Don Sachs gear since he began, and he modified all my HK Citation gear before he came out with his own creations. I bought a Willsenton 300b integrated amp and was smitten with the sound of it, inexpensive as it is. Don told me that he was designing a 300b amp with the legendary Lynn Olson and lo and behold, I got one of his early pair of pre-production mono-blocks recently, driving Spatial Audio M5 Triode Masters.
Now with a week on the amp, I am eager to say that these 300b amps are simply sensational, creating a sound that brings the musicians right into my listening room with a palpable presence. They create the most open vidid presentation to the music -- they are neither warm nor cool, just uncannily true to the source of the music. They replace his excellent Kootai KT88 which I was dubious about being bettered by anything, but these amps are just outstanding. Don is nearing production of a successor to his highly regard DS2 preamp, which also will have a unique circuitry to mate with his 300b monos via XLR connections. Don explained the sonic benefits of this design and it went over my head, but clearly these designs are well though out.. my ears confirm it.
I have been an audiophile for nearly 50 years having had a boatload of electronics during that time, but I personally have never heard such a realistic presentation to my music as I am hearing with these 300b monos in my system. 300b tubes lend themselves to realistic music reproduction as my Willsenton 300b integrated amps informed me, but Don's 300b amps are in a entirely different realm. Of course, 300b amps favor efficient speakers so carefully component matching is paramount.
Don is working out a business arrangement to have his electronics built by an American audio firm so they will soon be more widely available to the public. Don will be attending the Seattle Audio Show in June in the Spatial Audio room where the speakers will be driven by his 300b monos and his preamp, with digital conversion with the outstanding Lampizator Pacific tube DAC. I will be there to hear what I expect to be an outstanding sonic presentation.
To allay any questions about the cost of Don's 300b mono, I do not have an answer.
- ...
- 883 posts total
Hi, CuriousJim! I am kind of dubious about any KEF speaker being really 91 dB/meter/watt. That’s almost 1% conversion efficiency, and believe it or not, that’s quite high for the mainstream market, and especially KEF. True efficiencies between 85 and 88 dB are much more common. Efficiencies in that range need 100 to 200 watt amplifiers, which is very large for tube amps. When people say XYZ speaker needs 200 watts to "come alive", they are not joking. 1% efficiency is 92 dB/meter/watt. 0.5% is 89 dB/meter/watt. 0.25% is 86 dB/meter/watt. This raises the question ... where does all that power go, if not making sound? It heats the voice coil, which eventually radiates its heat to the magnet structure, which radiates its heat into the cabinet. Copper increases its resistance with temperature, which leads to a type of dynamic compression as the voice coil heats and cools. In addition, voice coil heating eventually damages the cylindrical former it is wound on, leading to driver failure over time. That’s why Nomex and other fire-resistant materials are commonly used for VC formers. This is the charm of high efficiency speakers: for a given SPL, much less power is wasted in heating the voice coil. More is turned into sound, which is the goal. P.S. I agree, it is somewhat annoying to realize that 99%, or more, of the expensive watts we buy do nothing more than heat a voice coil, but that’s what’s really happening. It’s kind of shocking: hundreds of watts from the AC wall socket end up as milliwatts of acoustic power. The rest ends up as heat, and not in a great place, either. |
I have to admit that the conclusion about SE+PP leads to emphasis on 5th harmonic is a bit counter-intuitive to me from pure math perspective, but I haven’t read his paper and perhaps there are certain situations that contribute to that conclusion (?).
Many report excellent result using a tube pre with a solid state or push-pull tube power amp though. In many cases, such combination includes some SE stages with at least one PP stage. So, SE+PP is not necessarily bad empirically :-)
|
It is difficult to predict real-world distortion from idealized triode or pentode models. The models assume tubes with perfect physical assembly and ideal emission characteristics. In practice, grid windings are not evenly spaced, grids are tilted a little bit, coatings on the cathode are not perfectly uniform, and there is always just a bit of residual contamination. Tubes are not built by robots, but skilled technicians, and as a result, they are all a little different from each other. By looking at spectral distortion measurements, patterns that are unique to each manufacturer emerge, and none conform exactly to the tube model. (The map is not the territory.) Successive stages multiply distortion terms as more and more kinks end up in the transfer curve. Of course, this applies to the entire transmission chain from microphone to loudspeaker, with everything in-between. Models are useful for finding bias points and the expected high-frequency response, but predictions of high-order distortion can be way off from the tubes you can actually buy. Low-order terms like 2nd and 3rd harmonic distortion may conform to the model, but I wouldn’t trust it further than that, not with real tubes. Think of the models as first-order approximations. |
I don’t know Don’s power supply design, although with Lynn’s collaboration, I’m sure some sort of split supply has been implemented - whether via isolation or regulation. It’s one area Don and I haven’t discussed. Lynn’s original Karna concept (which I’m employing in my NiWatts) runs a separate separate B+ supply for the output section. We’ve already discussed how the sound of a 300B is the sound of the driver. With a dedicated power supply to run the input and driver sections (separate power transformers and supply circuitry in the NiWatts - 4 transformers in total per channel), an inefficient speaker may whip the output tube’s power supply into submission, while the input and driver stages are just coasting along. The perceived effect is that of much more power than the specs would lead you to expect. Lynn was at a session where I drove a pair of Von Schweikerts with my puny, single-ended NiWatts. Until things got rock concert loud (I put in my musicians’ ear plugs - these guys were nuts), the NiWatts were breezing along. ... Thom @ Galibier
|
- 883 posts total