20amp cord

I am using RGPC 600S also and as ET did, I have changed the supplied RGPC Power Cord with a shorter Power Cable
( with 20A IEC of course ). Factory-built cable are with
at least 1.5 Meter, I took one Furutech Evolution Power
Cable , divided it into two, one change to 20A IEC to
plug into the RGPC. the other half I made one power cable
with 15A normal plug and used to supply power to the CSE
isolation power regenerator + regulator.

Compared with the supplied RGPC factory cable, the shorter
Evolution proved to be a great enhancement to background
silence and soundstage deepness, high & lower range are
also improved. ( after repeated comparison )

Stringreen, HI

Thanks for your response. I may say "Yes " with your opinion. But also "No" under another test.

I had the actual tests made repeatedly and with the presence of several other listeners too.

I have been still keeping the previous rigs, almost
"two & half sets " that means I have now at home more than
two sets of Audio rig except speakers which I had only 2 sets , Old Tannoy DC3000 and the V.A. Parsifal . Interconnects & Power cables are more than necessary for 3 complete sets. Speaker Cables only 2 sets now as I had sold the Tara Lab " THE ONE". keeping only the Venture Ultimate Ref SP/Cable, and the Siltech G6 Eskay Plus the
siltech G6 emperor Jumpers used on the Parsifal's.

I keep the inferior sets in the reading/working room,where I need to
watch 3 monitors for FX/ financial, bullion trading at the same time every weekday ,evening & till mid night and need also hear the CNBC if switch on volume sometimes, and keep the music on . the Parsifal and others of higher & newer audio's are in the livingroom.

So, not only the RGPC I,ve tested, the CSE sine-wave regenerator & regulator, the Syngeristic Research "powerCell" all three of them I had tested with
both two systems, singly or in combinations,. In the Real Hi-fi Living room, I have two direct dedicated Power A/C,
the "working" room is with normal wall-sockets sharing with other A/C sockets. All net real improvements should be more obvious in the room without dedicated A/C { where
the A/C Power source is ness purified ). But the reslut
is that all three Power Improvement components showed only
very slightly improvements in the " working room" ; the only more significant is when some other Elect appliances is switching /changing current level .

The same effect applied to the Sine-wave Power regenator/
regulator supplying to my Wadia 861 which I appreciated
and recommended to friends. It is working with less
merit with the old Dennon 6500 CD Players .

So, it is always true that result is different depending
on {1} each one's own ears (2) each system of different
characteristics (3) room environments and walls.

the Previous Post may be not clear enough.
All Power conditioners, RGPC, CSE sine_wave Reformer, Power Cell of Synergistic Research, work with less merit increase
in the inferior set, though the environment actually need
more of them. all or any of them proved to be of effect
( extent varying due to position they are used in the system ) more in the more advanced system, though the very front A/C power are already isolated .
One experiment, a little wasteful with 6-socket RGPC 600's
is where I put it in-between the CSE sine-wave reformer & the CD ( the former deliverying max only 1K WATT, which I aimed to used only for the WADIA 861 CD ) it also show dramatically improvement to the source CD.
But most of the time, I used now
for the HD TV, Blue-Ray DVD, the DAC separately for the DVD
since I enjoy the improvement to TV video signal most out
of the RGPC. and also separating two dedicated A/C - Video and audio Portion .
For Sound Quality, the ER Power Cell then
CSE Power reformer works very well for the other gears.

For head-to-head compariaon, may be personalised /biased any how, and not withstanding the price difference, for pre-amp & Power amp
works better with SR Power Cell than the RGPC ( which one must be reminded that RGPC is only 1/3 of the pirce )