terminalvoltage
Responses from terminalvoltage
| speaker upgrade I would take a serious look at Selah Audio's SA-1 monitor.It is available as a kit or complete speaker. Completed is $850 I believe, kit is $475 with x/o assembled. The SA-1 has a Fountek ribbon and a Vifa 7"xt woofer. Assembled may be over you bu... | |
| Snell E/III vs. Snell Type D loudspeakers Interesting mods you have done to your CV. Bypassing the fuse makes sense, but did you put an ohm meter on the L-pad to determine the proper attenuation and make up the difference with resistors? Proper zobel configured? Curious as to how it incre... | |
| Snell E/III vs. Snell Type D loudspeakers B minor is a very good speaker. The mids are about the same as the CV, but they have a nice 12" side firing woofer in them. Oh so slightly better bass response. Both very dynamic, neutral mids, slightly warm low end. The CV rocks with their duel 8... | |
| Snell E/III vs. Snell Type D loudspeakers I own EIII & CV Snells, M's and cc1 center. I did own the type D before I traded them for the CV. The EIII I think are an outstanding value. I originally traded my EIII for the D's and found myself wishing I had my E's back. The D's have a ful... | |
| Fuse or braker for dedicated lines? Fuses or cicuit breakers are not going to make an audible difference . With cb you can always reset them. Fuses are a one time deal with the fuse link melting once too much current has passed through it. Should not make a difference in sound, as b... |