sd02720
Responses from sd02720
| Problem with one channel going out..... The deoxitD5 is indeed a great product. I have the kit and have used it a few times on all of my tube connections. Thank you | |
| Problem with one channel going out..... Thanks kingharold and sgordon1...yes I've tried different carts and wiggled every single connection including the four pins at the cartridge. Through further messing around I think it has to be an internal issue with an electronic component in th... | |
| Problem with one channel going out..... I'm going to swap out the preamp with an Icon Audio one that I have at work tomorrow. Unfortunately, this issue comes and goes and it's not happening now. But that's my next step. I'll keep listening to it for a while and see if it happens again... | |
| Problem with one channel going out..... I replaced the Chinook with a step-up transformer by simply swapping out the two. It's a Bellini MT502. It's not powered, it just increases the signal coming from the MC cart | |
| Problem with one channel going out..... Thanks for the replies so far guys. Lewn, I wish I had documented my experiments better, but I didn't. Just now I swapped out the Chinook for a transformer, and the problem persists. So it's NOT the phono stage or TT Also, despite what I said ea... | |
| Crossover circuit; Hales Reference Revelation 3 speakers Sorry I am only seeing your response now. The whole front panel (containing the speakers) comes off. Inside the cabinet is a lot of insulation, etc. The crossover circuit boards are inside | |
| Crossover circuit; Hales Reference Revelation 3 speakers Hey guys, thanks for the insights. I replaced the blown components on the crossover boards, and turned out I needed to replace the drivers, too. Had some help from Madisound finding supposedly similar drivers to match the values of the originals... | |
| Crossover circuit; Hales Reference Revelation 3 speakers Thanks, Tim...those are good suggestions. I have yet to actually remove the board and have a closer look, to see if I can get a reading on the markings. There is a hand-written label on there (as there is on all of the caps) which seems to say "... | |
| Crossover circuit; Hales Reference Revelation 3 speakers Thanks! I will explore that, as well | |
| experiencing distorted playback with Benz Ruby 2 perhaps the next upgrade....the system can always sound better! That's what drives us. That, and maybe some level of insanity, as well | |
| experiencing distorted playback with Benz Ruby 2 Thanks a lot for the detailed thoughts. As I also explained to the poor guy I bought the cartridge from, this is my first time ever playing around with a cartridge of this caliber. I was initially concerned that I was putting too much tracking for... | |
| experiencing distorted playback with Benz Ruby 2 Guys...after spending some time with a test record and tweaking, I noticed on the vertical tracking test the needle was almost bouncing out of the tracks in the 19-20Hz range. I increased the tracking force a bit and this went away.Now the thing s... |