santsuru

Responses from santsuru

Carver, THE standard of excellence IMO
The first "audiophile system" I ever listened to was in college. All the physics students had the best equipment and the fellow that had the system that I listened to the most had a Phase Linear with Advent speakers. That system was played almost ... 
Fuses and confusion
I have decided not to change the fuses but for what maybe a different reason than the ones listed above. Firstly I was unable to confirm the type of fuse to switch to and in the process off searching for the correct specifications I was put into c... 
Fuses and confusion
Carver Load Invariant has three fuses:                                                                                  1 10A 32V 313                             and the markings beside the fuse says 120 VAC 50/60 Hz AC line Fuse              ... 
Fuses and confusion
Sunfire TGA-7401 has three fuses:                                                                                     1 BUSSMDA 15 A 15 amp 250 v   and the marking beside the fuse says 15 amp MDA 15                                              ... 
Fuses and confusion
I apologize I tried to format the text but when I posted it the text reformatted itself. 
Fuses and confusion
Again, thanks to everyone for the feedback. I took the fuses out of my two amps and looked at them and found the following: Sunfire TGA-7401 has three fuses:                                                                    1 BUSSMDA 15 A 15 amp... 
Fuses and confusion
Thanks for everyone's help. I was able to poke around and figure out how to get the fuses out and copy down the markings and put them back in without blowing up components or fuse. 
Should I use RCA cables or Digital cables for interconnects
Thank you for your information. I using a Marantz AV8805 preamp and a Sunfire TGA-7401 combined with B&W 805 D3's, a B&W 600 series center channel, with two CM5's for the surround speakers. I took the advice I was given and tried both digi... 
Should I use RCA cables or Digital cables for interconnects
This is a reply from Marantz Support. I thought I would pass along: Hello Santsuru,Thank you for contacting Marantz Support, we value you as a customer and appreciate the opportunity to be of assistance!If you use a digital cable, the signal will... 
Should I use RCA cables or Digital cables for interconnects
I took possession of Ruby today. The dealer suggested I hookup both digitally and RCA and play with it. I used a pair of Purist Audio RCA cables and I can't quit listening. Thanks for the help and info, big help. 
Should I use RCA cables or Digital cables for interconnects
Thank you! I am new at this and I appreciate your answer.